Instructions / Assembly

T-NUT

STEP 22: LAG POSTS

SCREWS AND 3/8" WASHERS.

5: ATTACH EACH LAG POST TO THE MIDDLE CORNER POST WITH 3/8" X 3-1/2" LAG

ONE DOES NOT HAVE.

HERE THAT THE LEFT

THIS POST HAS A HOLE

ROOF - RIGHT

LAG POST WOOD

4 X 4 X 60-1/4"

ROOF - LEFT

LAG POST WOOD

1: TWO 4 X 4 60-1/4" LAG POSTS WILL BE USED TO EXTEND THE MIDDLE CORNER POSTS TO

ACCEPT THE UPPER LEVEL ROOF.

2: MAKE SURE TO INSTALL THE T-NUTS INTO THE LAG POSTS TOP HOLES AS SHOWN IN THE

DRAWING BELOW BEFORE MOUNTING IT TO THE MIDDLE POSTS.

3: REST THE BOTTOM OF EACH LAG POST ON TOP OF THE 2 X 6 X 70 BACK PANEL BOARD.

4: CENTER EACH LAG POST DIRECTLY OVER THE CENTER OF THE MIDDLE CORNER POSTS.

4 X 4 X 60-1/4"

3/8" X 5"

3/8" WASHER

LAG SCREW

2 X 6 X 70

BACK PANEL BOARD

T-NUT