Instructions / Assembly

ManualsBrandsGorilla Playsets ManualsParks, Playsets & PlayhousesMalibu Deluxe II Swing Set with Timber Shield

13"

18"

13"

STEP 9: ANGLE SUPPORTS

1: FOUR 2 X 4 X 13" ANGLE SUPPORTS ARE MOUNTED UNDER THE DECK ON THE LEFT AND

RIGHT SIDES OF THE PLAY SET TO THE 2 X 6 BOTTOM PANEL BOARDS. THE TOP OF THE

ANGLE SUPPORT SHOULD BE FLUSH OR LOWER THAN THE TOP OF THE DECK SUPPORT.

2: AT THE TOP USE 2-1/2" WOOD SCREWS THROUGH THE DECK SUPPORT INTO THE ANGLE

SUPPORT. AT THE BOTTOM USE ONE 2" AND ONE 3" WOOD SCREW TO FASTEN THE ANGLE

SUPPORT TO THE CORNER POST.

3: FOUR 2 X 4 X 18" ANGLE SUPPORTS ARE MOUNTED UNDER THE DECK ON THE FRONT

AND REAR OF THE PLAY SET TO THE 2 X 4 DECK SUPPORTS. THE TOP OF THE ANGLE

SUPPORT SHOULD BE FLUSH OR LOWER THAN THE TOP OF THE DECK SUPPORT.

4: AT THE TOP USE TWO 2-1/2" WOOD SCREWS THROUGH THE DECK SUPPORT INTO THE

ANGLE SUPPORT. AT THE BOTTOM USE ONE 2" AND ONE 3" WOOD SCREW TO FASTEN THE

ANGLE SUPPORT TO THE CORNER POST.

2 X 4 X 13"

DETAIL A

SCALE 1 : 8

SUPPORT

ANGLE

SHOULD BE FLUSH OR LOWER

THAN THE DECK SUPPORT

2 X 4 X 18"

SUPPORT

ANGLE

BOTTOM

PANEL

BOARD

TOP OF ANGLE SUPPORTS

2 X 6

2 X 4

DECK

SUPPORT

2 X 4 X 18"

DECK

SCREW

WOOD

2 X 4 X 13"

ANGLE

SUPPORT

3" WOOD

SCREW

2" WOOD

SCREW

SUPPORT

SCREW

2" WOOD

SCREW

3" WOOD

2-1/2"

2 X 6

BOTTOM

PANEL

BOARD