Instructions / Assembly

ASSEMBLY
KEEP TIGHT AT THE PEAK
2" WOOD SCREW
BATTENS. FASTEN THE ROOF PANEL PEAK
SUPPORT TO THE ROOF PANELS USING 2"
WOOD SCREWS.
ON TOP OF THE TWO PANELS AND
PEAK SUPPORT
ROOF BOARD
BATTENS
FLUSH TO
FLUSH (AT THE PEAK)
3: PLACE THE FRONT PLASTIC ARCH ON TOP OF THE ROOF SUPPORTS. MAKE SURE TO KEEP THE ROOF PANEL
ASSEMBLIES TIGHT AT THE PEAK AND THE FRONT PLASTIC ARCH FLUSH TO THE ROOF OVERHANG ON BOTH SIDES.
FASTEN USING #8 X 1-1/4" WOOD SCREWS. THE FINAL ASSEMBLY SHOULD MEASURE 69-7/8" AT THE BOTTOM.
#8 X 1-1/4" WOOD SCREW
FRONT PLASTIC ARCH
FLUSH TO THE SIDES OF THE ROOF BOARD
ROOF PANEL
4: PLACE THE ROOF PANEL PEAK SUPPORT
125-5-1081-RPPS
ROOF PANEL LEFT
ROOF PANEL RIGHT ASSEMBLY
FLUSH TO
ROOF OVERHANG
FLUSH TO
ROOF OVERHANG
69
7
8
"
FACING UP
COUNTERSUNK HOLES
ROOF PANEL LEFT ASSEMBLY
5 x 11 x 46.97
5 x 11 x 46.97
ROOF PANEL RIGHT ASSEMBLY
GAP
(AT THE BOTTOM)
1: FIND ONE 5 X 11 X 46.97" ROOF PANEL LEFT ASSEMBLY, ONE 5 X 11 X 46.97" ROOF PANEL RIGHT ASSEMBLY, ONE
5/4 X 5 X 10.81 ROOF PANEL PEAK SUPPORT AND A FRONT PLASTIC ARCH.
2: PLACE THE ROOF PANEL ASSEMBLIES ON A FLAT SURFACE WITH THE COUNTERSUNK HOLES FACING UP, ALIGN THE
ANGLED ENDS OF THE ROOF PANEL ASSEMBLIES FLUSH AT THE PEAK AND LEAVING A GAP AT THE BOTTOM OF THE
SEAM, THIS PROVIDES YOU FREEDOM FOR ADJUSTABILITY.
STEP 68: FRONT GABLE ASSEMBLY
114