Instructions / Assembly

ROOF PEAK SUPPORT

5/4 X 6 X 10"

ROOF SUPPORT-LEFT

2 X 4 X 51-1/8"

ROOF SUPPORT-RIGHT

2 X 4 X 51-1/8"

COUNTERSUNK HOLE FACES DOWN

FLUSH

#8 X 2"

WOOD

DETAIL A

SCREW

FLUSH

3: USE FOUR #8 X 2" WOOD SCREWS TO ATTACH THE ROOF PEAK SUPPORT TO THE ROOF

4: MAKE ONE MORE ROOF SUPPORT ASSEMBLIES BY REPEATING 2 AND 3.

STEP 53: ROOF SUPPORT ASSEMBLIES

SUPPORTS AS SHOWN BELOW.

1: LOCATE TWO 2 X 4 X 51-1/8" ROOF SUPPORT (LEFT), TWO 2 X 4 X 51-1/8" ROOF

SUPPORT (RIGHT) AND TWO 5/4 X 6 X 10" ROOF PEAK SUPPORT PIECES.

2: FIND A FLAT SURFACE TO WORK ON. LAY THE ROOF SUPPORTS DOWN ON THE FLAT

SURFACE WITH THE COUNTERSUNK HOLES FACING DOWN. ALIGN THE ANGLED ENDS OF

THE ROOF SUPPORTS FLUSH WITH ONE ANOTHER. PLACE A ROOF PEAK SUPPORT ON TOP

OF THE ROOF SUPPORTS AS SHOWN. THE EDGES SHOULD BE FLUSH WHERE SHOWN

BELOW.

COMPLETED ROOF

SUPPORT ASSEMBLY

(MAKE FOUR)

FLUSH