Instructions / Assembly

WASHER

5/16" X 3-1/2"

LAG SCREW

ROOF BOARD

ROOF FINISHER

ROOF STARTER REAR

(FIRST ONE)

1 X 4 X 76-7/8"

1-1/2" WOOD SCREW

ROOF BOARD

(SEVENTH ONE)

5/16"

CHIMNEY

2 X 4 X 69-3/4"

ROOF FINISHER SUPPORT

STEP 31: ROOF REAR SECTION AND CHIMNEY

1: PLACE THE 1 X 5 X 76-7/8" ROOF BOARDS ON TOP OF THE ROOF SUPPORTS, FITTING THE TONGUE END INTO THE

GROOVE END OF THE ROOF STARTER REAR. THIS SIDE OF THE ROOF GETS SEVEN ROOF BOARDS.

2: FASTEN THE ROOF BOARDS TO THE ROOF SUPPORTS WITH 1-1/2" WOOD SCREWS.

3: PLACE THE 1 X 4 X 76-7/8" ROOF FINISHER AT THE END OF THE ROOF ASSEMBLY, AND FASTEN WITH 1-1/2"

WOOD SCREWS.

4: MOUNT THE 2 X 4 X 69-3/4" ROOF FINISHER SUPPORT UNDERNEATH THE ROOF UP AGAINST THE ROOF FINISHER

REAR

AND ATTACH TO THE REAR CORNER POST USING 5/16" LAG SCREWS AND 5/16" WASHERS.

TIP: USE THE INSTRUCTIONS PROVIDED IN THE APPENDIX TO BUILD THE CHIMNEY. INSTALL THREE ROOF BOARDS

AND INSTALL THE CHIMNEY ACCORDING TO THE CHIMNEY INSTRUCTIONS.