Instructions / Assembly

STEP 45: MOUNTING THE SLIDE

1: PLACE THE SLIDE IN THE OPENING AT THE FRONT OF THE PLAY SET NEXT TO THE ROCK

WALL.

2: THE FLARED END OF THE SLIDE WILL REST ON TOP OF THE BOTTOM PANEL BOARD. THE FLAT

AREA OF THE SLIDE WITH THE FOUR INDENTATIONS WILL LIE ON TOP OF THE DECK BOARDS.

3: ALIGN THE HOLES IN THE SLIDE OVER THE DECK BOARDS AVOIDING GAPS. PREDRILL 1/8"

PILOT HOLES THROUGH THE CENTER OF THE INDENTATIONS IN THE SLIDE INTO THE DECK

BOARDS. ATTACH THE SLIDE TO THE DECK BOARDS WITH FOUR 1-1/4" PAN HEAD SCREWS.

** DO NOT OVER TIGHTEN**

SLIDE

FLAT AREA LIES OVER DECK BOARDS

** DO NOT OVER TIGHTEN **

FLARED END RESTS OVER BOTTOM PANEL BOARD.

#14 X 1-1/4" PAN HEAD SCREW

BOTTOM

PANEL

BOARD