Instructions / Assembly

STEP 39: SUNBURST
1: LOCATE ONE 5/4 X 3 X 17-1/2" LARGE RAY, TWO 5/4 X 3 X 11" SMALL RAYS AND ONE
5/4 X 4 X 42" RAY SUPPORT.
2: LAY ALL THE PARTS OUT ON A FLAT SURFACE AS SHOWN BELOW.
3: CENTER THE LARGE RAY WITH THE CENTER OF THE RAY SUPPORT. PAY ATTENTION TO
THE HOLE LOCATIONS IN THIS PART SO YOU DO NOT PLACE IT UPSIDE DOWN. ATTACH THE
LARGE RAY TO THE RAY SUPPORT WITH TWO #8 X 2-1/2" WOOD SCREWS.
4: PLACE A SMALL RAY ON EITHER SIDE OF THE LARGE RAY AS SHOWN. ATTACH EACH
SMALL RAY TO THE RAY SUPPORT WITH ONE #8 X 2-1/2" WOOD SCREW.
5: REPEAT SUBSTEPS 1 THROUGH 4 AND ASSEMBLE ONE MORE SUNBURST.
RAY SUPPORT
5/4 X 4 X 42"
SMALL RAY
5/4 X 3 X 11"
5/4 X 3 X 17-1/2"
LARGE RAY
5/4 X 3 X 11"
SMALL RAY
#8 X 2-1/2"
WOOD SCREWS
66