Instructions / Assembly

STEP 26: ROOF PEAK SUPPORTS

1: PLACE A 5/4 X 6 X 10-3/4" ROOF PEAK SUPPORT ON THE OUTSIDE OF THE ROOF

SUPPORTS.

2: LEVEL THE ROOF PEAK SUPPORT. MAKE SURE THE ANGLED SURFACES ARE FLUSH OR

SLIGHTLY BELOW THE TOP SURFACES OF THE ROOF SUPPORTS.

3: USE #8 X 2" WOOD SCREWS IN THE THE PREDRILLED HOLES TO ATTACH THE ROOF PEAK

SUPPORTS TO THE ROOF SUPPORTS.

ROOF PEAK SUPPORT

5/4 X 6 X 10-3/4"

ROOF PEAK SUPPORT

DETAIL A

SCALE 1 : 6

#8 X 2" WOOD SCREWS

IN PREDRILLED HOLES.

ANGLED SURFACE FLUSH OR SLIGHTLY

BELOW TOP SURFACE OF ROOF

SUPPORT ON BOTH SIDES.