Instructions / Assembly

STEP 21: ATTACHING THE ROCK WALL

1: PLACE THE ROCK WALL INTO POSITION ON THE FORT AS SHOWN BELOW; THE ROCK WALL SIDE IS 9-3/4" FROM

THE END OF THE DECK PANEL BOARD. USING THE 90 BRACKETS AS A TEMPLATE; DRILL A 3/8” HOLE THROUGH THE

DECK PANEL BOARD. THE BOTTOM OF THE GREEN BRACKETS SHOULD BE APPROXIMATELY 3/4" FROM THE

BOTTOM OF THE DECK PANEL BOARD.

2: FROM THE UNDERSIDE OF THE DECK INSERT A T-NUT INTO THE BACKSIDE OF THE 3/8” HOLES ON THE DECK

PANEL BOARD.

3: ATTACH THE ROCK WALL WITH 5/16 X 1-1/2” BOLTS AND 5/16” WASHERS.

4: WHEN THE BRACKETS ARE SECURE, AND THE ROCK WALL IS IN ITS FINAL POSITION; TIGHTEN THE 5/16 X 1-1/2”

BOLTS ON THE ROCK WALL SIDES.

5/16" WASHER

SCALE 1 : 6

DETAIL B

5/16" X 1-1/2"

HEX BOLT

3/4"

DECK PANEL BOARD