Instructions / Assembly

STEP 8: ANGLE SUPPORTS

1: THE FOUR 2 X 4 X 13" ANGLE SUPPORTS ARE MOUNTED UNDERNEATH THE AREA WHERE THE DECK WILL BE

LOCATED ON THE FRONT AND BACK OF THE FORT.

2: USE TWO 2-1/2" WOOD SCREWS THROUGH THE DECK SUPPORT INTO THE TOP OF THE ANGLE SUPPORT, AND ONE

2" AND ONE 3" WOOD SCREW TO FASTEN THE ANGLE SUPPORT TO THE CORNER POSTS.

DECK SUPPORT

ANGLE SUPPORT

2 X 4 X 13"

2-1/2" WOOD SCREW

3" WOOD SCREWANGLE SUPPORT

2" WOOD SCREW

DECK SUPPORT

NOTE TOP OF ANGLE SUPPORT

MUST NOT EXTEND PAST TOP

OF DECK SUPPORT OR IT WILL

INTERFERE WITH DECK BOARDS.