Instructions / Assembly

STEP 7: LAG SCREWS

1: AT THIS POINT THE FRAME IS UNSTABLE. YOU MUST HAVE AN ASSISTANT HELP YOU MOVE THE FRAME TO

AVOID RACKING THE FRAME AND POTENTIALLY CRACKING BOARDS.

2: PLACE THE FRAME IN ITS FINAL POSITION AND FOLLOW THE PROCEDURES AT THE FRONT OF THE MANUAL

TO LEVEL AND SQUARE THE STRUCTURE. ONCE THE FRAME IS LEVEL, SQUARE, AND SET INTO POSITION; GO

BACK AND INSERT THE 5/16 X 3-1/2" LAG SCREWS AND 5/16" WASHERS IN ALL OF THE REMAINING HOLES OF

THE 2 X 6 PARTS. NOTE: THERE WILL NOT BE ANY PREDRILLED HOLES IN THE CORNER POSTS FOR THE LAG

SCREWS. LAG SCREWS ARE SELF-TAPPING.

LAG SCREW

5/16" X 3-1/2"

5/16" WASHER