Instructions / Assembly

STEP 6: REAR FRAME ASSEMBLY
1: PLACE THE 2 X 6 X 70" SANDBOX BOARD ON THE REAR OF THE CORNER POSTS. THE HOLES IN THE
SANDBOX BOARD ARE OFFSET UP.
2: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE TOP HOLES OF THE SANDBOX BOARD TO THE
T-NUTS INSTALLED ON THE CORNER POSTS. THE BOTTOM HOLES WILL BE USED LATER.
3: PLACE THE 2 X 6 X 70" REAR DECK PANEL BOARD ON THE FRONT OF THE CORNER POSTS. THE HOLES IN
THE REAR DECK PANEL BOARD ARE OFFSET UP.
4: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE TOP HOLES OF THE REAR DECK PANEL BOARD
TO THE T-NUTS INSTALLED ON THE CORNER POSTS. THE BOTTOM HOLES WILL BE USED LATER.
5: PLACE THE 2 X 4 X 70" REAR TOP PANEL BOARD ON THE FRONT OF THE CORNER POSTS. THE HOLES IN THE
TOP PANEL BOARD ARE OFFSET UP.
6: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE TOP HOLES OF THE REAR TOP PANEL BOARD TO
THE T-NUTS INSTALLED ON THE CORNER POSTS.
SANDBOX BOARD
5/16" WASHER
(OFFSET UP)
2 X 6 X 70"
5/16 X 4-1/2"
HEX BOLT
REAR OF PLAY SET
2 X 6 X 70"
REAR DECK
PANEL BOARD
(OFFSET UP)
2 X 6 X 70"
REAR TOP
PANEL BOARD
(OFFSET UP)
33