Instructions / Assembly

STEP 35: INSTALLING THE ROPE LADDER

1: TAKE THE ROPE LADDER ASSEMBLY FROM STEP 34 AND LOOK FOR THE BOARD THAT HAS KNOTS TIED ABOVE AND

BELOW THE ROPE LADDER STEP. THIS WILL BE THE TOP OF THE ROPE LADDER.

2: THREAD THE TOP OF THE ROPE LADDER THROUGH THE HOLES IN THE ROPE LADDER SUPPORT, AND TIE A SECURE

KNOT.

3: THREAD THE BOTTOM OF THE ROPE LADDER THROUGH THE HOLES IN THE ROPE LADDER RUNNER, AND TIE A

SECURE KNOT.

4: MAKE SURE THE ROPE LADDER ROPES WILL NOT LOOP AROUND YOUR HAND.

TIE A KNOT BEHIND THIS

BOARD

TIE A KNOT BEHIND THIS

BOARD