Instructions / Assembly

STEP 37: TARP

1: LAY TARP ACROSS TARP BOARDS, MAKE SURE HEM SIDE IS DOWN.

2: CENTER TARP ON BOARDS AND BEGIN WITH THE FRONT RIGHT SIDE CORNER. PLACE ONE 1-1/4" PAN HEAD

SCREW INTO THE GROMMET.

3: PULL THE TARP TIGHT AND SCREW IN THE LEFT FRONT SIDE CORNER.

4: NOW THE NEXT RIGHT SIDE GROMMET WILL RECEIVE A SCREW, THEN THE SAME GROMMET ON THE OPPOSITE

SIDE (LEFT SIDE).

5: ESSENTIALLY, WHAT YOU ARE DOING IS ALTERNATING FROM SIDE TO SIDE, FROM THE FRONT OF THE FORT

MOVING BACK, TO KEEP THE TARP TIGHT AND WRINKLE-FREE.