Instructions / Assembly

STEP 29: MOUNTING THE LADDER
1: PLACE THE TOP OF THE BRACKETS 1-1/2" DOWN FROM THE TOP OF THE 2 X 6.
2: CENTER THE LADDER SIDE TO SIDE.
3: MARK THROUGH EACH BRACKET ONTO THE 2 X 6.
4: DRILL 3/8" HOLES AT EACH MARK THROUGH THE 2 X 6.
5: INSTALL T-NUTS INTO THE BACK SIDE OF THE 2 X 6.
6: FASTEN THE BRACKETS TO THE 2 X 6 WITH 5/16" X 1-1/2" HEX BOLTS AND 5/16" WASHERS.
DETAIL A
SCALE 1 : 8
1
1
2
"
INSTALL T-NUTS ON BACK SIDE OF 2 X 6.
5/16" WASHER
MARK THROUGH HOLE ONTO 2 X 6.
DRILL 3/8" HOLE THROUGH 2 X 6.
5/16" X 1-1/2"
HEX BOLT
A
136