Instructions / Assembly

ROOF PEAK SUPPORT
5/16" WASHER
LAG SCREW
5/16" X 3-1/2"
(TRIANGLE) ON OUTSIDE
ROOF SUPPORT ASSEMBLIES
ROOF PEAK SUPPORT
(TRIANGLE) ON OUTSIDE
STEP 24: INSTALL ROOF SUPPORT ASSEMBLIES
1: PLACE TWO ROOF SUPPORT ASSEMBLIES ON THE CLATTER BRIDGE TOWER DECK.
2: THE (TRIANGLE) ROOF PEAK SUPPORT SHOULD FACE THE OUTSIDE.
3: ATTACH EACH ROOF SUPPORT ASSEMBLY TOTHE HOLES DRILLED ON THE INSIDE OF THE
CORNER POSTS WITH TWO 5/16" X 3-1/2" LAG SCREWS WITH TWO 5/16" WASHERS.
131