Instructions / Assembly

STEP 41: PANEL SUPPORT (SAFETY BOARD)

1: PLACE A 2 X 4 X 44" PANEL SUPPORT (SAFETY BOARD) AGAINST THE LEFT CORNER POSTS.

2: THE TOP OF THE BOARD SHOULD BE 24" ABOVE THE BOTTOM OF THE END SANDBOX BOARD. MARK

LOCATIONS AT 24" ON EACH POST.

3: PLACE THE TOP OF THE BOARD EVEN WITH THE MARKS. NOW MARK THROUGH THE HOLES IN THE BOARD

ONTO THE CORNER POSTS. DRILL 11/64" HOLES 2-1/2" DEEP AT THE HOLE MARKS.

4: NOW BOLT THE BOARD TO THE CORNER POSTS WITH 3-1/2" LAG SCREWS AND 3/8" WASHERS.

DETAIL A

SCALE 1 : 14

24"

2 X 4 X 44"

PANEL SUPPORT

(SAFETY BOARD)

3/8" WASHER

" LAG SCREW