Instructions / Assembly

STEP 20: SWING BEAM PLATE
1: PLACE THE SWING BEAM PLATE ON TOP OF THE SWING BEAM MOUNT, LINING UP PILOT HOLES.
2: FASTEN THE SWING BEAM PLATE TO THE SWING BEAM MOUNT ON THE OUTER HOLES USING 3
1
2
" CARRIAGE BOLTS
ON TOP, AND
3
8
" WASHERS AND
3
8
" LOCK NUTS ON THE BOTTOM. PLACE GREEN BOLT COVERS OVER EXPOSED
THREADS AFTER SECURING.
3: LEAVE THE MIDDLE HOLE EMPTY, IT WILL BE USED LATER.
SWING BEAM
PLATE
3
1
2
" CARRIAGE BOLT
" LOCK NUT
" WASHER
3
8
3
8
BOLT CAP
45