Instructions / Assembly

STEP 6: ATTACHING TARP SUPPORT BOARDS
1: THE 2 X 4 X 81" TARP SUPPORT BOARDS (WITH THREE PRE-DRILLED HOLES) ATTACH TO THE TOP OF THE FRONT
AND REAR CORNER POSTS WITH 4" HEX BOLTS AND
5
16
" WASHERS.
2: HOLES SHOULD BE CENTERED VERTICALLY ON BOTH BOARDS.
" HEX BOLT
5
16
" WASHER
4
1
2
FRONT OF PLAY SET
SHORT END
OVERHANGS
ON THIS SIDE.
2 X 4 X 81"
TARP SUPPORT
BOARD
31