Product Manual

Step 4B (attaching to tailgate without S-Hooks):

We recommend using S-Hooks. Measure the complete height of your tailgate. Using the chart below as a guide,

measure from the top of your side rail up along the side of your tailgate and make a mark. You will make this mark on

whichever side of the tailgate’s side support angle/tube, that when the cable is attached to the tailgate, will allow

the cable to pull out of the housing and through the rollers in a straight line; will allow the cable to travel in the

grooved portion of the rollers; and will not allow the cable to come in contact with the housing or anything else

as it operates. Refer back to Step 4, #6 to continue installation.

Tailgate height & construction Approx. tailgate attachment points from the top of trailer side rail

4 feet, angle Just take all slack out of cable

4 feet angle and tubing 20-inches

4 feet, tubing 22 1/2-inches

5 feet, angle 26-inches

5 feet, tubing 28-inches

6 feet, angle or tubing 29 1/2-inches

FIGURE 1, housing and roller assembly FIGURE 2, locking ring assembly