Installation Guide

Gorilla Easy Connect Quick Connect Sweeper Nozzle Use Guide
1) Unpack item and make sure all
parts are present. The item is
shipped connected. To
disconnect, pull back the
grooved collar on spray nozzle
towards the nozzle end and pull
out the male quick connector.
2) Aach male quick connector by
threading it onto a ¾ inch
standard garden hose end.
3) Pull back grooved collar on
spray nozzle and insert male
connector end into spray nozzle
collar and then release collar to
complete connecon.
4) Please note, this is not an
adjustable nozzle, it will allow
water to ow as long as the
source is on.
For quesons or issues please email:
[e-mail]