Instructions for Use Washing machine
Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. Some of the materials may be recycled, others deposited or decomposed. To avoid pollution of environment, once your appliance is no longer useful, take it to your local authorized waste appliance dealer.
Description of washing machine 1. Front panel 2. Detergent dispenser 3. Door 4. Filter lid 5. Adjustable legs 6. Water outlet hose 7. Water inlet hose 8. Mains power cable Technical information (depending on model) • Max. load: 5,5 kg / 5 kg Dimensions (w x d x h): 600 mm x 440 mm x 850 mm Depth with door open: 88 cm Weight (net): 78 kg / 63 kg Nominal voltage: 230 V, 50 Hz Power: 2000 W Power socket: (230 V, 50 Hz, 10 A) Water pressure: min. 0,05 MPa, max. 0,8 MPa Fuse: 10 A 316971 • Max.
Cautions • Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! • When connecting your washing machine to water supply, be sure to use brand new water inlet hose and appropriate sealing gaskets (attached). • Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be damaged if frozen.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
Leveling the appliance • Put the appliance in horizontal position by turning the adjustable legs. The legs are adjustable up to +/- 1 cm. After the adjustment tighten the nuts firmly (A) - towards the bottom of the machine! Vibrations, moving of the appliance and loud operation due to incorrect setting of the adjustable feet shall not be covered by this warranty. The appliance should be placed on a surface with concrete base; the surface should be dry and clean in order to prevent slipping.
Partial Aqua-stop (water stop system) In case of damage on the interior pipe, leaking is prevented by automatic closing system which stops water inlet to the machine. In such cases display A turns red. Inlet pipe must be replaced. Complete Aqua-stop (certain models only) In case of damage on the interior pipe, leaking is prevented by automatic closing system which stops water inlet to the machine. Security system also detects whether there is any water leakage within the interior of the machine.
316971 8
Operation A B C D E F G - Program selector knob Spinning rpm setting key / pump stop Additional function key Confirm additional function key Delayed start key START / PAUSE button Display Program selector Basic programs Partial programs Cotton Heavy duty Quick program 15° Tap Water+ Rinse Synthetics Softening Delicate Spinning + Pumping water Wool Sportswear Manual wash Mix 316971 Keys for settings (MENU) - Use this key to scroll through additional functions.
Washing procedure - Open the door of the machine. Door is opened by pulling the handle (lever) on the right hand side of the door towards you. - Sort the laundry by the type of fabrics. Do the buttons and zippers, tie the strings and pull out the pockets. Very delicate laundry should be put in a special protective sack. It is suggested to load the drum with items of different sizes.
1 - Spinning rpm; 2 - Time remaining until program completion / delayed start countdown 3 - Additional functions; 4 - Washing stages (prewash, washing, rinsing, spinning); Display (G) After setting the basic or partial programs and pressing the START (F) key, the display indicates spinning rpm of the selected program and time remaining until program completion.
Low water temperature, low network voltage, and smaller loads of laundry may extend the washing time; the time indicated on the display is constantly adjusted to account for such conditions. - Selecting the basic programs ( , , , , , , ) Select one of the basic programs by rotating the program selector dial (A). These are full programs that include all washing stages, including conditioning and spinning (see program table).
Mix Normally soiled dyed laundry made of various resistant fibres, washed at 30 or 40°C. - Selecting additional functions ( , , , , , , , , , , ) Selecting an additional function allows changing the basic programs or partial programs.
Prewash For washing heavily soiled laundry with mostly superficial dirt. In basic programs, prewash is switched off. It can be activated using the Selection (C) key in programs for cotton, synthetics, delicates, and mix. Short program Power-efficient function for washing less soiled laundry or a smaller load. Washing and rinsing time is decreased. With some programs, water consumption is also lower. function is selected with the Cotton 30°C If the short program is activated.
Delayed start (select with (E) key) When the (E) key is pressed, the display (G) will indicate the time 00:00 and the symbol . With each subsequent press on the (E) key, time on the display will increase by 30 minutes (up to 2:00) or by 1 hour (for a maximum delay of 24 hours). If no other key is pressed, the display will again indicate the duration of the program after a while, but the delay time will be saved. The function is activated when the START (F) key is pressed. Time will count down by minutes.
- Adding washing and softening agents (see Tips for washing and energy saving) • pre-wash compartment • main wash compartment • softener compartment If you do not apply the program which includes the pre-wash feature, you may add washing detergent directly into the drum, using the measuring vessel. When adding softener, be careful to fill the dispenser only up to the marked level. Be sure to close the detergent dispenser when opening/closing the appliance door.
• By the user Selecting the PUMP STOP function function, the program will If you have chosen the pump stop will flash stop at the last rinse and the PUMP STOP symbol on the display (washing machine door locked the entire time). Before pressing the START (F) key, spinning rpm can be decreased. If you do not wish to do so, the program can be ended by pressing the START (F) key, and the washing process will end with the spinning cycle defined by the program.
Special functions • Child lock - Engage the child lock by simultaneously pressing the (C) keys and holding them for at least three seconds. and (D) Selection is confirmed with an audio signal and the symbol which appears on the display. Use the same procedure to deactivate the child lock. - As long as the Child lock function is engaged you may not alter the program or additional functions. You may merely switch off the machine by turning the program selector (A) to the position “0”.
Tips for washing and energy saving • Before washing sort out the laundry according to the type, degree of dirtiness and color resistance. • Prior selecting the washing program consult the sewn tab with information on a particular piece of laundry (see Maintenance Chart on the last page). • Wash separately the new colored textile products for the first time. • Wash heavily soiled laundry in small quantities and add more detergent. • Treat stubborn stains with special stain remover, it will save energy.
• Liquid detergents are intended for main wash only, without pre-wash. • Insert particularly delicate linen (stockings, delicate female underwear, etc.) into the special bag. • High spin RPM leave less moisture in laundry which dries out much quicker in the tumble dryer, thereby saving energy. Do not put clods of detergent into the soap dispenser as the tube in the washing machine may clog.
• If necessary, clean the cover of the bung under the running water. • Wash it under running water using a brush, and dry it. Remove any leftover dried detergent from the bottom of the casing. • Clean the entire rinsing area of the washing machine with a brush, especially the nozzles on the upper side of the rinsing chamber. • Clean frequently the water inlet hose screen under running water. 316971 • After each wash wipe the door rubber gasket. This will prolong its useful life.
• Open the filter lid using flat screwdriver or similar tool. • Filter needs occasional cleaning, especially following heavily shaggy or old laundry. Before cleaning, drain any water from the machine via drain pipe. • Turn it anti-clockwise, pull it out and clean under running water. • Insert the filter back as shown on the picture, and tighten by turning it in clockwise direction. To ensure good sealing the gasket surface (A) must be dirt free.
Troubleshooting Washing machine automatically controls the operation of individual functions during the washing program. If any faults are identified, this is reported by displaying (Fx) and the time remaining until program completion on the display. The machine will signal the fault until it is turned off. If the fault is on the heating system, the machine will complete the washing program, but without heating the water.
Failure The machine does not work (On/Off symbol does not light up). Water is leaking from the machine. The machine moves during operation. The machine vibrates during the spin. Excessive foaming during washing. Laundry is not properly spun. No failure is reported. Greasy wads appear on the laundry. Laundry is stained after washing. White powdery residues on the laundry. Detergent residues in the dispenser. Softener is not completely rinsed, or water is left in the dispenser dish.
Washing time is longer than usual. Time indicated on the display is corrected during the washing cycle. FAILURE 1 Program temperature not reached (F1 is displayed) FAILURE 2 Washing program does not start • At the start of the washing cycle: washing stage symbol flashes. • During washing: F2 is displayed FAILURE 3 Water is not supplied to the machine (F3 is displayed after approx. 4 minutes).
Failure FAILURE 6 Program temperature not reached (F6 is displayed) Possible cause Remedy • Heater failure • Inlet water too cold • Manual addition of water • Turn off the appliance and wait for a few seconds; • turn the appliance back on and repeat the washing program. If the failure is reported again, call a service technician. Water outlet is clogged Check if: • the filter is clean, • outlet pipe is not jammed, • the drain is clogged, • outlet pipe is positioned higher than 1m.
Tables Energy cons. [kWh] Water cons. [L] 800 - 1600 [RPM] Spin [RPM] Temp. [°C] Basic programs (A-30%) Max.
Program chart - 7 kg (A-30%) Temp. [°C] Water cons. [L] 800 - 1600 [RPM] Energy cons. [kWh] Cotton 7 95 60 2,19 Cotton* 7 / 3,5** 60 49 0,75 / 0,83** Cotton - heavy Cotton* 7 60 7 / 3,5** 40 Spin [RPM] Max.
Program chart - 7 kg (A-20%) Energy cons. [kWh] 49 0,87 / 0,99** 56 1,17 40 49 0,67 / 0,71** 30 56 0,35 1000 40 0,17 1600 56 0,18 46 0,97 43 0,65 43 0,56 Cotton 7 95 Cotton* 7 / 3,5** 60 7 60 Cotton* 7 / 3,5** Cotton 7 Cotton - quick 17’ 2 30 Cotton - heavy Cotton - 15° Tap Water+ 7 15 Synthetics 3,5 60 Synthetics 3,5 40 Synthetics 3,5 30 Delicate 3 40 Delicate 3 30 Wool 2 30 Sportswear Spin [RPM] 2,19 Temp. [°C] 55 Max.
Program chart - 5,5 kg / 5 kg (slim) (A-10%) 5kg Water cons. [L] 800 - 1400 [RPM] Energy cons. [kWh] Cotton 5,5 5 95 45 1,95 Cotton* 5,5/2,75* 5/2,5** 60 42 0,89/0,71** Cotton - heavy Spin [RPM] 5,5kg Temp. [°C] Max.
Program chart / Additional functions Additional functions Spinning speed pump stop Easy ironing Cold wash z Higher water level z Additional rinse Short program Cotton Prewash / Basic programs z z z z z/z z z z z z/z z z z z z/z z z z z z z/z Delicate z z z z z/z Wool z z z z z/z Cotton heavy Cotton - 15° Tap Water+ Synthetics z Sportswear z z z z Manual wash z z z z z Mix z z z z z z/z z/z z z/z Partial programs Rinse z/z Softening z Sp
Maintenance chart Normal wash Max. washing temp. 95°C Delicate wash Whitening Max. washing temp. 40°C Max. washing temp. 60°C Whitening in cold water Max. washing temp. 30°C Manual washing Washing not allowed Whitening not allowed Ironing Hot iron max. 200°C Hot iron max. 150°C Hot iron max.
