Operation Manual

311220
Mix
Normally soiled dyed laundry made of various resistant fi bres,
washed at 30 or 40°C.
- Selecting additional functions
(
, , , , , , , , , , )
Selecting an additional function allows changing the basic
programs or partial programs. Additional functions can be
selected with the following keys:
Dodatne funkcije lahko izbirate s tipkami:
- Key (B) – selecting spinning speed (rpm)
- Key (C) – other functions
- Key (E) – delayed start
Select the function after selecting the basic program,
but before pressing the START (F) key.
Spinning speed / pump stop (select with (B) key)
Pressing the (B) key will reduce spinning speed in steps until it
reaches “0”. With each pres, the spinning rpm will decrease. The
last option is “pump stop”, which means that the laundry remains
soaked in the water from the last rinsing (pump stop icon
and
maximum spinning speed for selected program are indicated).
Use the pump stop function when you want to prevent wrinkling
or if you are unable to take the laundry from the machine
immediately after program completion. It is particularly convenient
and appropriate with programs for synthetic fi bres
and delicate
program
. Use of pump stop function is not recommended with
woollens
and manual wash (see section Interruption / By
the user / Activating the PUMP STOP function).
Choosing additional functions with the (C) key
Each time the (C) key is pressed, a set of function is displayed
which are possible with a particular program. The currently
highlighted function will fl ash before it is selected. Use the (D)
key to confi rm your selection and then the symbol of the selected
functions is highlighted and it no longer fl ashes. If you do not
wish to select the currently displayed function, use the (C) key to
move to the next function. With settings were several functions
can be selected, those that are basically possible are indicated
on the display. If you wish to select more additional functions,
repeat the process. Follow the same process to deactivate a
function. Some settings cannot be selected simultaneously (see
Program / Additional Settings Table).
If the key (C) or (D) is not pressed after a certain period of time,
the program will jump back to the main menu.
13