Operation Manual

300095

Easy ironing (selection by separate knob (E))

Gentle tumbling and ﬁ nal spin prevent excessive creasing of

laundry. Follow the determined maximum load for particular

programs. Suggested reduced load (cotton 3 kg, synthetics 2 kg).

Auto-clean (SterilTub) program

Run this program to eliminate any impurities, bacteria, and odor

from the washing machine.

Before running the auto-clean (SterilTub) program, empty the

washing machine drum; there shouldn’t be any clothes in the

washing machine during the auto-clean (SterilTub) program.

Adding a small amount of powder detergent will additionally

improve the effect of the auto-clean (SterilTub) program.

To run the auto-clean (SterilTub) program, rotate the program

selector knob (A) to the position “Cotton 95°C”, then pressing the

(E) (Easy ironing) key and hold it for three seconds.

“STERILTUB” and the time remaining until the end of the

program will be indicated on the display.

If you do not regularly use washing program with temperatures

over 60°C, it is recommended to run the auto-clean program at

least once per month.

- Selection of additional functions using the MENU knob (B)

By pressing the MENU knob (B) additional functions available

for changing or adding to the pre-selected washing program

are displayed in sequence. If you do not wish to activate or

change certain displayed function, press knob B (MENU) to

move to the next available function.Functions with the choice

of multiple available settings, display the default one in bold

(spin RPM, extra rinse, more water, sound signal). Using the

SELECTION knob (C) you may change settings. Activation of a

particular function is conﬁ rmed by the relevant symbol appearing

on the display. Function is deactivated by another pressing the

SELECTION knob (C).

Spin speed / Rinse hold

Best recommended spin RPM for the selected program appear on

the display. Using the button (C) in some models you can increase

the selected RPM (1300-1800) or reduce in steps till “0”, when all

spins are off. Last selection is “pump stop” meaning that laundry

will remain soaked in the last rinse water.

RINSE HOLD function is selected if you want the laundry not to be

excessively creased in case you are unable to remove it from the

drum immediately after the end of washing cycle. This is specially

handy for washing of synthetics

and delicate laundry .

However, it is not recommended for wool

or manual wash .