Instructions for Use Washing machine
Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. Some of the materials may be recycled, others deposited or decomposed. To avoid pollution of environment, once your appliance is no longer useful, take it to your local authorized waste appliance dealer.
Description of washing machine 1. 2. 3. 4. Front panel Detergent dispenser Door (depending on the model) Filter lid 5. 6. 7. 8. Adjustable legs Water outlet hose Water inlet hose Mains power cable Technical information (depending on the model) • Max. load: 5,5 kg / 5 kg / 4,5 kg Dimensions slim aparat (w x d x h): 600 mm x 440 mm x 850 mm Depth with door open: 88 cm Weight (net): 76 kg Nominal voltage: 230 V, 50 Hz Power: 2300 W Power socket: (230 V, 50 Hz, 10 A) Water pressure: min. 0,05 MPa, max.
Cautions • Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! • When connecting your washing machine to water supply, be sure to use brand new water inlet hose and appropriate sealing gaskets (attached). • Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be damaged if frozen.
Installation and connection Package removal In removing the wrapping be careful not to damage the appliance with a sharp object. Before connecting the appliance, let it warm up to room temperature (wait for two hours). • Our appliances are packed in environmentally friendly materials which may be recycled, deposited or decomposed without any threat to the environment. • To this end all wrappings are marked accordingly. Removal of transport brackets • Move the pipes.
• If you have a tumble dryer of the same dimensions, you can place it on top of the washing machine. Water inlet connection To ensure correct operation of the appliance, water pressure inlet must be between 0,05 and 0,8 MPa. Minimum water pressure can be established by measuring the quantity of poured out water. 3 litres of water must be poured out from completely opened tap in 15 seconds.
Water outlet connection • Fix the outlet hose to run into the sink or the bathtub, or connect it directly to the wall drain outlet (diameter min. 4 cm). • Wall drain must be installed properly and must enable occasional cleaning. • Fasten the outlet hose support with a piece of rope led through the hose elbow, to prevent the hose from slipping to the floor. The end of outlet hose should be placed between minimum 60 cm and maximum 100 cm above the floor level.
Operation A B C D - program selector MENU knob SELECTION knob quick program knob Program selector E F G H - easy ironing knob START/PAUSE knob door knob (depending on the model) display Basic programs Partial programs Cotton Heavy duty Rinse Quick program Synthetics Softening Delicate Pumping water Wool Spinning Manual wash Jogging Mix Functional knobs Knob B (MENU) - Use this knob to scroll around main menu. Knob C (SELECTION) - Use this knob to scroll around main menu.
Before first use - Selecting language To change the language in which the information appear on the display, press simultaneously the key MENU (B) and SELECTION(C), and turn the program selector (A) from position “0” to the first program in clockwise direction (Cotton 95°C). The name of actually selected language appears on the display. Scroll down the selection of languages by pressing the SELECTION knob (C), until you find the desired language. Then turn the program selector back to position “0”.
Washing machine operation 1. Name of the program, 2. Duration or time of day, 3. Symbols for activation of additional functions, 4. Water quantity in liters, 5. Spin RPM Program is selected by turning the program selector from the “0” position to the desired washing program. The display indicates particular washing program, selected by the program selector.
Synthetics Normally stained shirts, blouses and other polyester and polyamide garments, or a mixture of these fabrics with cotton. For heavily stained resistant color laundry, use program with pre-wash. Delicate This is a program for delicate fabrics (dresses, skirts, blouses) and curtains. Wool Especially gentle program for washing wool and garments made from mixture of other fabrics with wool, appropriately marked for machine washing. Manual wash Very gentle program concluded with short gentle spin (max.
Easy ironing (selection by separate knob (E)) Gentle tumbling and final spin prevent excessive creasing of laundry. Follow the determined maximum load for particular programs. Suggested reduced load (cotton 3 kg, synthetics 2 kg). Auto-clean (SterilTub) program Run this program to eliminate any impurities, bacteria, and odor from the washing machine.
Extra rinse/ Clean water sensor This function is for persons, especially sensitive to detergents. Using the SELECTION knob (C) you may select one or two extra rinses, or activate the Clean water sensor (S) - certain models only. By activating extra rinse the display indicates adequately increased quantity of water. If the clean water sensor is activated, the display indicates the symbol “S” instead of water quantity.
In case you wish to change or suspend the delayed start after starting the machine with the START knob (F), you may do so by pressing the MENU knob (B). The delayed start appears; using the SELECTION button (C) reset the delay period. Setting the end of program (certain models only) Caution: prior this setting check whether the current time of day is set correctly (see section Special functions). Set the time you want the program to end the washing procedure.
- Change settings. - Press the START/PAUSE button (F) and reactivate the child lock. In case you fail press any knob within 15 seconds, the protection is automatically reactivated. Permanent disengagement of the function: a.) During the operation: - Keep the MENU knob (B) pressed for 4 seconds. - Stop the program by pressing the START/PAUSE knob (F). - Using the MENU knob (B) move to child lock option. - Press the SELECTION knob (C) to disengage the function. b.
- Adding washing and softening agents (see tips for washing and energy saving) • pre-wash compartment • main wash compartment • softener compartment If you do not apply the program which includes the pre-wash feature, you may add washing detergent directly into the drum, using the measuring vessel. When adding softener, be careful to fill the dispenser only up to the marked level. Be sure to close the detergent dispenser when opening/closing the appliance door.
Low water temperature, low network voltage, and smaller loads of laundry may extend the washing time; the time indicated on the display is constantly adjusted to account for such conditions. - End of operation • Sound signal indicates that you may now open the door of the machine. • Extract the laundry from the drum and remove any alien objects from the door gasket. • Leave the door ajar to allow the interior to dry. • Close the water inlet faucet.
After certain time you may open the door if the water level in the drum is low enough, otherwise you must fist empty the water or Spin . (use additional program Pumping water out MA (models with the door opening by pressing the G knob feature the function which enables you to open the door of the appliance during power failure using special lever, located adjacent to the filter.
Tips for washing and energy saving • Before washing sort out the laundry according to the type, degree of dirtiness and color resistance. • Prior selecting the washing program consult the sewn tab with information on a particular piece of laundry (see Maintenance chart on the last page). • Wash separately the new colored textile products for the first time. • Wash heavily soiled laundry in small quantities and add more detergent. • Treat stubborn stains with special stain remover, it will save energy.
• Insert particularly delicate linen (stockings, delicate female underwear, etc.) into the special bag. • High spin RPM leave less moisture in laundry which dries out much quicker in the tumble dryer, thereby saving energy. Do not put clods of detergent into the soap dispenser as the tube in the washing machine may clog. Cleaning and maintenance Disconnect the washing machine from the mains before cleaning! • The casing should be cleaned with soft cloth and mild detergent.
• Wash it under running water using a brush, and dry it. Remove any leftover dried detergent from the bottom of the casing. • Clean the entire rinsing area of the washing machine with a brush, especially the nozzles on the upper side of the rinsing chamber. • Clean frequently the water inlet hose screen under running water. • After each wash wipe the door rubber gasket. This will prolong its useful life. • Open the filter lid using flat screwdriver or similar tool.
• Insert the filter back as shown on the picture (Fig. : arrow and pointer - certain models only), and tighten by turning it in clockwise direction. To ensure good sealing the gasket surface (A) must be dirt free. (depending on the model) Failures If the washing machine identifies failures in the operation, it reports it immediately. Sound alarm is heard and the display reads ERROR. Number identifies the type of failure.
Possible cause Machine is not powered. ERROR 2 Washing program does not Door is not properly closed. start • At the beginning of the washing program: on/off LED is flashing ERROR 3 Water does not enter the Disturbed water inlet. machine (after approx. 4 min the machine reports failure F3). Remedy Check if: • plug is in the socket, • there is power in the socket, • the fuse is OK. Push it towards the machine. Check if: • the water tap is open, • inlet pipe net filter is clean. Push the START button.
Failure Laundry is stained after washing. White powdery residues on the laundry. Detergent residues in the dispenser. Softener is not completely rinsed, or water is left in the dispenser dish. Unpleasant smell in the washing machine drum. Washing time is longer than usual. Time indicated on the display is corrected during the washing cycle.
Failure ERROR 4 Spinning rpm not reached in the selected program (the machine reports a failure F4) ERROR 5 Motor operation interrupted; or motor does not operate (the machine reports a failure F5) ERROR 6 Program temperature not reached (the machine reports a failure F6) ERROR 9 Machine pumps water; (the machine reports a failure F9) (only on some models) Possible cause Remedy • rpm sensor disconnected • Motor overload due to too high water level (manual addition of water) or too big laundry load • M
Tables Program chart - 7 kg o WA 73xxx,... (depending on the model) Energy cons.
Program chart - 6 kg o WA 63xxx,... (depending on the model) Cotton 6 60 Cotton heavy * 6 60 1700 RPM RPM 58 51 2,10/2,05** 52 45 1,12/1,00** 52 45 1,14/1,02** 800 - 1700 95 Energy cons. kWh 1000 - 1700 6 Water cons. L 800 - 900 Temp. (°C) Cotton Spin max. (RPM) Type of laundry Max.
Program chart - 6/7 kg n WA 63xxx, WA 73xxx,... (depending on the model) RPM 800 - 1700 Spin max. (RPM) Energy cons.
Program chart - 6/7 kg (A-10%) n WA 64xxx, WA 74xxx,... (depending on the model) RPM 800 - 1700 Spin max. (RPM) Energy cons.
Program chart - 6/7 kg o WA 64xxx, WA 74xxx,... (depending on the model) 95 Cotton 6 7 60 Cotton heavy * 6 7 60 Cotton * 6 7 40 Cotton 6 7 30 Cotton - quick 17’ 2 2 30 Synthetics 3 3,5 60 Synthetics 3 3,5 40 Synthetics 1800 800 - 1700 7 RPM 1000 - 1700 6 Spin max. (RPM) 7kg Temp. [°C] PMax. load [kg] 6kg Cotton Type of laundry Energy cons. kWh [kWh] 800 - 900 Water cons.
Program chart - 6/7 kg (A-10%) n WA 64xxx, WA 74xxx,... (depending on the model) kg Type of laundry Energy cons. kWh RPM RPM 6kg 1200 - 1800 Water cons. L 1200 - 1800 Spin max. [RPM] Temp. [°C] Max.
Program chart - 5,5 kg / 5 kg / 4,5 kg (slim) o Water cons. L Basic programs kg Energy cons. kWh 1000-1400 800 - 900 Spin max. (RPM) Type of laundry Temp. (°C) Max.
Program chart - 5,5 kg / 5 kg / 4,5 kg (slim) n Water cons. [L] Energy cons. [kWh] 1000-1400 RPM 800 - 900 Spin max. [RPM] Temp. [°C] Max.
Program chart - 5,5 kg / 5 kg / 4,5 kg (slim) (A-10%) n Water cons.
Cotton / / / / / / -/ Synthetics Delicate / Wool / Manual wash Jogging Mix / Cold wash Soaking Spin speed Rinse hold / / Cotton heavy Cotton - quick 17’ Pre-wash Higher water level / Easy iron Basic programs Quick program Program Extra rinse / clean water sensor Program chart / Additional functions / -/ / / Partial programs Rinse /- Softening
Maintenance chart Normal wash Max. washing temp. 95°C Delicate wash Whitening Max. washing temp. 40°C Max. washing temp. 60°C Whitening in cold water Max. washing temp. 30°C Manual washing Washing not allowed Whitening not allowed Ironing Hot iron max. 200°C Hot iron max. 150°C Hot iron max.
