Operation Manual

240203

In removing the wrapping be careful not to damage the

appliance with a sharp object.

Before connecting the appliance, let it warm up to room

temperature (wait for two hours).

• Our appliances are packed in environmentally friendly

materials which may be recycled, deposited or decomposed

without any threat to the environment.

• To this end all wrappings are marked accordingly.

• Move the pipes.

• Loosen screws (A) at the rear of the machine (Fig. 1).

• Remove the brackets (B) (Fig. 1) and slide them into the

groove on the blocking rod (Fig. 2) - the right one should be

turned around.

• Use the brackets to rotate blocking rods for 90° and pull them

out.

• Close the openings with attached plastic pegs.

Save transport brackets for eventual later use.Save the transport

brackets for eventual later use.

Fig. 1 Fig. 2

Be sure to remove the transport brackets prior ﬁ rst

use, otherwise the appliance may be permanently

damaged. In such cases the warranty conditions are

void.

Package removal

Removal of transport

brackets

The symbol on the product or on its packaging indicates that this product may not be

treated as household waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and electronic equipment. By ensuring

this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be

caused by inappropriate waste handling of thisproduct. For more detailed information

about recycling of this product, please contact your local city ofﬁ ce, your household

waste disposal service or the shop where you purchased the product.

Installation and connection