Operation Manual

240203

• Setting the time of day

- Press MENU (B) and QUICK knobs (D), and turn the program

selector (A) to the ﬁ rst clockwise program. Display reads

CLOCK and =00:00 (hh:mm) in the right corner.

- Hours start ﬂ ashing; push the SELECTION knob (C) to set the

time of day.

- Conﬁ rm setting by pushing the MENU knob (B).

- Now minutes start ﬂ ashing; they are set the same way as

hours.

- Conﬁ rm setting by pushing the MENU knob (B).

- Return the program selector back to “0” position. Set time is

automatically saved.

• Setting the Clean water sensor

In order for the Clean water sensor

to start working

properly, it must be ﬁ rst calibrated with water that the washing

machine is connected to. This is performed in the following

manner:

- Press MENU (B) and Easy ironing knobs (E), and turn the

program selector to the ﬁ rst clockwise program. Display

reads SENSOR CALIBRATION.

- Start calibration by pushing the START knob (F). The

machine performs calibration procedure automatically.

During the process the reading SENSOR CALIBRATION

is ﬂ ashing. When the procedure is completed, the display

reads END.

- Return the program selector (A) back to “0” position.

If you change the inlet water source during the use of your

washing machine, or in case you think that water quality has

changed, you may repeat the calibration procedure at any

time. The machine will save the value of the last calibration.

Special functions

(certain models only)