Instructions for Use Washing machine
Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. Some of the materials may be recycled, others deposited or decomposed. To avoid pollution of environment, once your appliance is no longer useful, take it to your local authorized waste appliance dealer.
Description of washing machine (depending on model) 1. 2. 3. 4. 5. Front panel Detergent dispenser Door (depending on the model) Filter lid Adjustable legs 6. Water outlet hose 7. Cold water inlet hose 8. Hot water inlet hose (only with some models) 9. Power cord Technical information (depending on the model) • Max.
Cautions • Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! • When connecting your washing machine to water supply, be sure to use brand new water inlet hose and appropriate sealing gaskets (attached). • Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be damaged if frozen.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of thisproduct.
Leveling the appliance • Put the appliance in horizontal position by turning the adjustable legs. The legs are adjustable up to +/- 1 cm. After the adjustment tighten the nuts firmly (A) - towards the bottom of the machine! Vibrations, moving of the appliance and loud operation due to incorrect setting of the adjustable feet shall not be covered by this warranty. The appliance should be placed on a surface with concrete base; the surface should be dry and clean in order to prevent slipping.
• In case of hot and cold water connection, connect one hose to cold and other to hot water faucet as marked at the rear of the appliance (letters C and H) (C - cold; H - hot) Cold • If your washing machine features both cold and hot water attachments, but you only wish to connect it to the cold water supply, please remove the hot water inlet hose from the back of the appliance. Then, use the supplied cover to close the hot water inlet.
Water outlet connection • Fix the outlet hose to run into the sink or the bathtub, or connect it directly to the wall drain outlet (diameter min. 4 cm). • Wall drain must be installed properly and must enable occasional cleaning. • Fasten the outlet hose support with a piece of rope led through the hose elbow, to prevent the hose from slipping to the floor. The end of outlet hose should be placed between minimum 60 cm and maximum 100 cm above the floor level.
Operation A B C D - program selector MENU knob SELECTION knob quick program knob Program selector E F G H - easy ironing knob START/PAUSE knob door knob (depending on the model) display Basic programs Partial programs Cotton Heavy duty Rinse Quick program Synthetics Softening Delicate Pumping water Wool Spinning Manual wash Jogging Mix Functional knobs 240203 Knob B (MENU) - Use this knob to scroll around main menu. Knob C (SELECTION) - Use this knob to scroll around main menu.
Before first use - Selecting language To change the language in which the information appear on the display, press simultaneously the key MENU (B) and SELECTION(C), and turn the program selector (A) from position “0” to the first program in clockwise direction (Cotton 95°C). The name of actually selected language appears on the display. Scroll down the selection of languages by pressing the SELECTION knob (C), until you find the desired language. Then turn the program selector back to position “0”.
Washing machine operation 1. Name of the program, 2. Duration or time of day, 3. Symbols for activation of additional functions, 4. Water quantity in liters, 5. Spin RPM Program is selected by turning the program selector from the “0” position to the desired washing program. The display indicates particular washing program, selected by the program selector.
Synthetics Normally stained shirts, blouses and other polyester and polyamide garments, or a mixture of these fabrics with cotton. For heavily stained resistant color laundry, use program with pre-wash. Delicate This is a program for delicate fabrics (dresses, skirts, blouses) and curtains. Wool Especially gentle program for washing wool and garments made from mixture of other fabrics with wool, appropriately marked for machine washing. Manual wash Very gentle program concluded with short gentle spin (max.
Easy ironing (selection by separate knob) Gentle tumbling and final spin prevent excessive creasing of laundry. Follow the determined maximum load for particular programs. Suggested reduced load (cotton 3 kg, synthetics 2 kg). - Selection of additional functions using the MENU knob (B) By pressing the MENU knob (B) additional functions available for changing or adding to the pre-selected washing program are displayed in sequence.
Cold wash For washing less soiled or colour-sensitive clothes. Upon switching this function ON, the heating function of this cycle is switched OFF, therefore the whole program is adequately shortened. Pre-wash Used for washing heavily stained laundry, especially with superficial stains. In default setting the pre-wash function is off. It is activated by pressing the SELECTION knob (C) on programs for cotton, synthetics, delicate and mixed laundry.
Caution: If Clean water sensor is engaged, the program may last longer for extra rinsing time. In case you wish to change or suspend the end of washing time after starting the machine with the START knob (F), you may do so by pressing the MENU knob. The end of washing time appears; using the SELECTION button (C) reset the selected time. Sound signal Sound signal beeps when a knob is pressed (function selection), and it also signals the end of washing program and reporting failures.
- Selection of partial programs ( , , , ) These are independent programs and may be used when you do not need the entire washing program. In case you would like to use more additional programs in a sequence, you must turn off the appliance prior any new program selection (turn the program selector to “0” for at least one second). Rinse Independent program for rinsing delicate laundry, without intermediate spinning and with short final spin. You may use it for rinsing manually washed delicate laundry.
Program is activated by pushing the START/PAUSE button (F). Sound signal confirms the start, the display indicates first washing stage and time left to the end of washing. Washing stages are consecutively displayed in accordance with the selected program. If the machine is set with the delayed start, it will start operating after the delay time expires. If the pump stop function was set, the program will stop at the final rinse and the display indicates flashing sign pump stop (RINSE).
Interruptions • By the user Temporary interruption By pressing the START/PAUSE knob (F) the program may be suspended at any time. If the Child lock is engaged you have to deactivate it first. Display reads PAUSE. After certain time you may open the door if the water level in the drum is low enough, otherwise you must fist empty the water or Spin . (use additional program Pumping water out By pressing the START knob (F) the program is continued where it had been interrupted.
(certain models only) • Setting the time of day - Press MENU (B) and QUICK knobs (D), and turn the program selector (A) to the first clockwise program. Display reads CLOCK and =00:00 (hh:mm) in the right corner. - Hours start flashing; push the SELECTION knob (C) to set the time of day. - Confirm setting by pushing the MENU knob (B). - Now minutes start flashing; they are set the same way as hours. - Confirm setting by pushing the MENU knob (B). - Return the program selector back to “0” position.
Tips for washing and energy saving • Before washing sort out the laundry according to the type, degree of dirtiness and color resistance. • Prior selecting the washing program consult the sewn tab with information on a particular piece of laundry (see Maintenance chart on the last page). • Wash separately the new colored textile products for the first time. • Wash heavily soiled laundry in small quantities and add more detergent. • Treat stubborn stains with special stain remover, it will save energy.
• Insert particularly delicate linen (stockings, delicate female underwear, etc.) into the special bag. • High spin RPM leave less moisture in laundry which dries out much quicker in the tumble dryer, thereby saving energy. Do not put clods of detergent into the soap dispenser as the tube in the washing machine may clog. Cleaning and maintenance Disconnect the washing machine from the mains before cleaning! • The casing should be cleaned with soft cloth and mild detergent.
• Wash it under running water using a brush, and dry it. Remove any leftover dried detergent from the bottom of the casing. • Clean the entire rinsing area of the washing machine with a brush, especially the nozzles on the upper side of the rinsing chamber. • Clean frequently the water inlet hose screen under running water. • After each wash wipe the door rubber gasket. This will prolong its useful life. • Open the filter lid using flat screwdriver or similar tool.
• Insert the filter back as shown on the picture (Fig. : arrow and pointer - certain models only), and tighten by turning it in clockwise direction. To ensure good sealing the gasket surface (A) must be dirt free. (depending on the model) Failures If the washing machine identifies failures in the operation, it reports it immediately. Sound alarm is heard and the display reads ERROR. Number identifies the type of failure.
Failure The machine does not work (display is not illuminated). Possible cause Machine is not powered. ERROR 2 Washing program does not Door is not properly closed. start • At the beginning of the washing program: on/off LED is flashing ERROR 3 Water does not enter the Disturbed water inlet. machine (after approx. 4 min the machine reports failure F3). Remedy Check if: • plug is in the socket, • there is power in the socket, • the fuse is OK. Push it towards the machine.
Laundry is stained after washing. White powdery residues on the laundry. Detergent residues in the dispenser. Softener is not completely rinsed, or water is left in the dispenser dish. Washing time is longer than usual. Time indicated on the display is corrected during the washing cycle. ERROR 1 Program temperature not reached (the machine reports a failure F1) Possible cause • Remains of fabrics, washing agent and softener in the filter.
Failure ERROR 4 Spinning rpm not reached in the selected program (the machine reports a failure F4) ERROR 5 Motor operation interrupted; or motor does not operate (the machine reports a failure F5) ERROR 6 Program temperature not reached (the machine reports a failure F6) ERROR 9 Machine pumps water; (the machine reports a failure F9) (only on some models) Possible cause Remedy • rpm sensor disconnected • Motor overload due to too high water level (manual addition of water) or too big laundry load • M
Tables Program chart - 7 kg o WA 73xxx,... (depending on the model) Energy cons.
Program chart - 6 kg o WA 63xxx,... (depending on the model) Cotton 6 60 Cotton heavy * 6 60 1700 RPM RPM 800 - 1700 95 Energy cons. kWh 1000 - 1700 6 Water cons. L 800 - 900 Temp. (°C) Cotton Spin max. (RPM) Type of laundry Max.
Program chart - 6/7 kg n WA 63xxx, WA 73xxx,... (depending on the model) RPM 800 - 1700 Spin max. (RPM) Energy cons.
Program chart - 6/7 kg (A-10%) n WA 63xxx, WA 73xxx,... (depending on the model) RPM 800 - 1700 Spin max. (RPM) Energy cons.
Program chart - 6/7 kg o WA 64xxx, WA 74xxx,... (depending on the model) kg Type of laundry Energy cons. kWh RPM RPM 6kg 1200 - 1800 Water cons. L 1200 - 1800 Spin max. (RPM) Temp. (°C) Max.
Program chart - 6/7 kg (A-10%) n WA 64xxx, WA 74xxx,... (depending on the model) kg Type of laundry Energy cons. kWh RPM RPM 6kg 1200 - 1800 Water cons. L 1200 - 1800 Spin max. [RPM] Temp. [°C] Max.
Water cons. L Cotton 4,5 95 47 40 1,80 Cotton 4,5 60 44 37 0,82 Cotton heavy * 4,5 60 44 37 0,85 1400 800 - 900 1000 - 1400 Type of laundry Temp. (°C) RPM Max. load (kg) Spin max. (RPM) Basic programs Energy cons.
Water cons. [L] Cotton 4,5 95 47 40 1,80 Cotton 4,5 60 44 37 0,82 Cotton heavy* 4,5/2,25** 60 44 37 0,85/0,74** Cotton* 4,5/2,25** 40 44 37 0,51/0,49** Cotton 4,5 30 44 37 0,15 Cotton - quick 17’ 2 30 30 30 0,13 Synthetics 2 60 31 31 0,61 Synthetics 2 40 29 29 0,34 Synthetics 1400 1000 1000 800 - 900 1000 - 1400 Type of laundry Temp. [°C] RPM Max. load [kg] Spin max. [RPM] Basic programs Energy cons.
Water cons.
Cotton / / / / / / -/ Synthetics Delicate / Wool / Manual wash Jogging Mix / -/ / / Rinse /- Softening /- Pumping water possibility 240203 36 /- Cold wash / Partial programs Spin Soaking Spin speed Rinse hold / / Cotton heavy Cotton - quick 17’ Pre-wash Higher water level / Easy iron Basic programs Quick program Program Extra rinse / clean wa
Maintenance chart Max. washing temp. 95°C Delicate wash Whitening Max. washing temp. 40°C Max. washing temp. 60°C Whitening in cold water Max. washing temp. 30°C Manual washing Washing not allowed Whitening not allowed Ironing Hot iron max. 200°C Hot iron max. 150°C Hot iron max.
240203 38
PS PG3,4 en (06-11)
