Operation Manual

141576

manner:

- Press MENU (B) and Easy ironing knobs (E), and turn the

program selector to the ﬁ rst clockwise program. Display

reads SENSOR CALIBRATION.

- Start calibration by pushing the START knob (F). The

machine performs calibration procedure automatically.

During the process the reading SENSOR CALIBRATION

is ﬂ ashing. When the procedure is completed, the display

reads END.

- Return the program selector (A) back to “0” position.

If you change the inlet water source during the use of your

washing machine, or in case you think that water quality has

changed, you may repeat the calibration procedure at any

time. The machine will save the value of the last calibration.