Operation Manual

141576

SELECTION button (C) reset the selected time.

Sound signal

Sound signal beeps when a knob is pressed (function selection),

and it also signals the end of washing program and reporting

failures.

In default setting the sound signal is on. You may select to switch

the sound signal off, or increase volume.

Legend:

sound signal off

normal sound signal setting

increased volume setting

If you switch the sound signal off the display indicates relevant

symbol

Child protection

Operation of the washer may be protected against accidental

changes of programs or functions. The function is activated by

pressing the START/PAUSE button (F).

Temporary disengagement of the function (during the operation):

- Keep the MENU knob (B) pressed for 4 seconds, relevant

symbol ﬂ ashes on the display.

- Stop the program by pressing the START/PAUSE knob (F).

- Change settings.

- Press the START/PAUSE button (F) and reactivate the child

lock.

In case you fail press any knob within 15 seconds, the protection

is automatically reactivated.

Permanent disengagement of the function:

a.) During the operation:

- Keep the MENU knob (B) pressed for 4 seconds.

- Stop the program by pressing the START/PAUSE knob (F).

- Using the MENU knob (B) move to child lock option.

- Press the SELECTION knob (C) to disengage the function.

b.) After the program is completed:

- Keep the MENU knob (B) pressed for 4 seconds.

If you switch the machine off after the end of program and fail

to disengage the child lock, it remains active during subsequent

start of the machine. To select new program, you must ﬁ rst

temporarily or permanently disengage the child lock function. The

function remains active even during power failure.

- Selection of partial programs (

, , , )

These are independent programs and may be used when you do

not need the entire washing program. In case you would like to

use more additional programs in a sequence, you must turn off

the appliance prior any new program selection (turn the program

selector to “0” for at least one second).