Operation Manual

239828
• reduces water consumption (with some programs)
• by pressing the key quick program on the program Cotton
30°C, activate the program Cotton 30°C-quick
.
Cold wash (only available with some models)
For washing lightly soiled or color-sensitive laundry.
When this function is activated, the heaters in the washing
machine are turned off, and the washing program is shortened.
Higher water level
• Improves rinsing, which is particularly important if your skin is
oversensitive to detergents.
• For washing heavily soiled laundry.
- Selection of partial programs ( , , , )
These are independent programs and may be used when you do
not need the entire washing program. In case you would like to
use more additional programs in a sequence, you must turn off
the appliance prior any new program selection (turn the program
selector to “0” for at least one second).
Rinsing
Independent program for rinsing sensitive laundry, without
spinning between individual rinsing cycles and with a short
fi nal spinning. It can be used for rinsing manually washed
sensitive laundry. Spinning speed (rpm) can be decreased.
Conditioning
This program is intended for conditioning, starching, or
impregnating washed laundry. It is completed by spinning at a
maximum of 1000 rounds per minute. Spinning speed can be
decreased.
Pumping the water out
Use it when the washing program was interrupted or if pump stop
function was engaged, and you only wish to pump the water out
of the drum, without spinning.
Spinning
Aggressive spinning for non-delicate laundry at high spin RMP.
You may engage the reduced spin RPM knob.
- Adding washing and softening agents
(see Tips for washing and energy saving)
• pre-wash compartment
• main wash compartment
• softener compartment
If you do not apply the program which includes the pre-wash
12