Instructions for Use Washing machine
Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. Some of the materials may be recycled, others deposited or decomposed. To avoid pollution of environment, once your appliance is no longer useful, take it to your local authorized waste appliance dealer.
Description of washing machine Technical information (depending on model) 5. Adjustable legs 6. Water outlet hose 7. Water inlet hose 8. Mains power cable Dimensions (w x d x h): 600 mm x 600 mm x 850 mm Dimensions (w x d x h): 600 mm x 440 mm x 850 mm Depth with door open: 106 cm / 88 cm (depending on model) Weight (net): 90 kg / 76 kg (depending on model) Nominal voltage: 230 V, 50 Hz Power: 2300 W / 2000 W (depending on model) Max.
Cautions • Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! • When connecting your washing machine to water supply, be sure to use brand new water inlet hose and appropriate sealing gaskets (attached). • Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be damaged if frozen.
Installation and connection Package removal In removing the wrapping be careful not to damage the appliance with a sharp object. Before connecting the appliance, let it warm up to room temperature (wait for two hours). • Our appliances are packed in environmentally friendly materials which may be recycled, deposited or decomposed without any threat to the environment. • To this end all wrappings are marked accordingly. Removal of transport brackets • Move the pipes.
• If you have a tumble dryer of the same dimensions, you can place it on top of the washing machine. Water inlet connection To ensure correct operation of the appliance, water pressure inlet must be between 0,05 and 0,8 MPa. Minimum water pressure can be established by measuring the quantity of poured out water. 3 litres of water must be poured out from completely opened tap in 15 seconds.
Do not immerse the Aqua-stop system inlet pipe into the water, because it contains the electric valve! Water outlet connection • Fix the outlet hose to run into the sink or the bathtub, or connect it directly to the wall drain outlet (diameter min. 4 cm). • Wall drain must be installed properly and must enable occasional cleaning. • Fasten the outlet hose support with a piece of rope led through the hose elbow, to prevent the hose from slipping to the floor.
Operation A - program selector knob B - delayed start C - setting the spinning speed (rpm) / stop pump D - quick program or cold wash (depending on the model) E - higher water level F - START / PAUSE button G - display Program selector Signal LED’s: - washing program stages • wash • rinse • spin - Child lock Basic programs Partial programs Cotton Pre-wash Heavy duty Easy iron Quick program Rinse Synthetics Pre-wash Softening Delicate Pumping water Wool Spinning Manual wash Mix Washing procedur
- Open the door of the machine. Door is opened by pulling the handle (lever) on the right hand side of the door towards you. - Sort the laundry by the type of fabrics. Do the buttons and zippers, tie the strings and pull out the pockets. Very delicate laundry should be put in a special protective sack. It is suggested to load the drum with items of different sizes.
If you wish the laundry not to be excessively creased at the end of washing, use easy ironing program . Synthetics Normally stained shirts, blouses and other polyester and polyamide garments, or a mixture of these fabrics with cotton. For heavily stained permanent press use program with pre-wash . Delicate This is a program for delicate fabrics (dresses, skirts, blouses) and curtains.
within five minutes after turning on the machine, the display will be automatically turned off to save energy. The display will turn on again when you rotate the program selector dial or press any button. If no action is taken after the end of the program, the display will also turn off after five minutes. Low water temperature, low network voltage, and smaller loads of laundry may extend the washing time; the time indicated on the display is constantly adjusted to account for such conditions.
• reduces water consumption (with some programs) • by pressing the key quick program on the program Cotton . 30°C, activate the program Cotton 30°C-quick Cold wash (only available with some models) For washing lightly soiled or color-sensitive laundry. When this function is activated, the heaters in the washing machine are turned off, and the washing program is shortened. Higher water level • Improves rinsing, which is particularly important if your skin is oversensitive to detergents.
feature, you may add washing detergent directly into the drum, using the measuring vessel. When adding softener, be careful to fill the dispenser only up to the marked level. Be sure to close the detergent dispenser when opening/closing the appliance door. • Push the START button (F). Sound signal confirms the start, the LED indicating particular washing stages stops flashing. The machine starts operating after a few seconds.
Interruptions • By the user Selecting PUMP STOP function position The program stops when it reaches the PUMP STOP (if this additional function was previously selected); (washing machine door is closed throughout the washing process). The LED over the button (C) starts to flash. Washing can be resumed by pressing the START (F) button. was selected, the program stops If the setting pump stop at the last rinsing cycle and the symbol for pump stop is indicated on the display.
• Child lock - To activate the child lock, simultaneously press the spinning button (C) and short program (or cold speed setting wash ) button (D) and hold them for at least three seconds. If the child lock is successfully activated, a sound is emitted and a signal LED lights up. Follow the same procedure to deactivate the lock. - As long as the Child lock function is engaged you may not alter the program or additional functions.
Tips for washing and energy saving • Before washing sort out the laundry according to the type, degree of dirtiness and color resistance. • Prior selecting the washing program consult the sewn tab with information on a particular piece of laundry (see Maintenance Chart on the last page). • Wash separately the new colored textile products for the first time. • Wash heavily soiled laundry in small quantities and add more detergent. • Treat stubborn stains with special stain remover, it will save energy.
• Insert particularly delicate linen (stockings, delicate female underwear, etc.) into the special bag. • High spin RPM leave less moisture in laundry which dries out much quicker in the tumble dryer, thereby saving energy. Do not put clods of detergent into the soap dispenser as the tube in the washing machine may clog. Cleaning and maintenance Disconnect the washing machine from the mains before cleaning! 239828 • The casing should be cleaned with soft cloth and mild detergent.
• If necessary, clean the cover of the bung under the running water. • Wash it under running water using a brush, and dry it. Remove any leftover dried detergent from the bottom of the casing. • Clean the entire rinsing area of the washing machine with a brush, especially the nozzles on the upper side of the rinsing chamber. • Clean frequently the water inlet hose screen under running water. • After each wash wipe the door rubber gasket. This will prolong its useful life.
• Open the filter lid using flat screwdriver or similar tool. • Filter needs occasional cleaning, especially following heavily shaggy or old laundry. Before cleaning, drain any water from the machine via drain pipe. • Turn it anti-clockwise, pull it out and clean under running water. 239828 • Insert the filter back as shown on the picture, and tighten by turning it in clockwise direction. To ensure good sealing the gasket surface (A) must be dirt free.
Troubleshooting Washing machine controls the operation of particular functions during washing. If irregularities are detected, the fault is signaled by displaying a message (Fx) on the display, and by rhythmical flashing of the LEDs. Simultaneously with the flashing of the LEDs, a sound signal is emitted several times, in the same rhythm. The machine signals the fault as soon as it is detected, and the program progress is paused.
FAILURE 2 Washing program does not start • At the beginning of the washing program: on/off LED is flashing • During washing: LEDs periodically flash twice FAILURE 3 Water does not enter the machine (after approx. 4 min the machine reports failure F3 - LEDs periodically flash three times). Water is leaking from the machine. The machine moves during operation. The machine vibrates during the spin. Excessive foaming during washing.
Failure Greasy wads appear on the laundry. Possible cause Too little detergent (laundry was very greasy). Laundry is stained after washing. You used liquid detergent or detergent for colored laundry which does not contain whitener. It is not the consequence of bad rinsing, but because of neophosphate detergents containing non soluble components (zeolites) for water softening. Such substances may be deposited upon the laundry. Low water flow pressure.
Failure FAILURE 5 Motor operation interrupted; or motor does not operate (the machine reports a failure F5 - the LEDs periodically flash five times) FAILURE 6 Program temperature not reached (the machine reports a failure F6 - the LEDs periodically flash six times) Possible cause Remedy Motor overload or motor failure. • Turn off the appliance and wait for a few seconds; • turn the appliance back on and repeat the washing program. If the failure is reported again, call a service technician.
Tables Program chart - 6/7 kg kg Energy cons. kWh RPM RPM 800 - 1400 1000 - 1400 Water cons. L 800 - 900 Spin (max. RPM) Temp. (°C) Max.
Water cons. L Basic programs 4,5 95 47 40 1,80 Cotton 4,5 60 44 37 0,82 Cotton + prewash 4,5 60 49 43 0,99 Cotton - heavy * 4,5 60 44 37 0,85 2 60 47 40 0,70 Cotton 4,5 40 Cotton 4,5 30 Cotton - quick 17’ 2 30 Synthetics 2 60 Synthetics + prewash 2 60 Synthetics 2 40 Delicate 1,5 40 Delicate Cotton - easy ironing 1,5 30 Wool 1 30 Manual wash 1 Mix 2 1400 1000 1400 1000 1000 700 800 - 900 1000 - 1400 Temp. (°C) Cotton Spin (RPM) Max.
Quick program Cold wash* Basic programs Higher water level / Program Spinning speed (rpm) Pump stop / Program chart/Additional functions Cotton z Cotton with prewash z Cotton heavy z Cotton z Cotton - quick 17’ z z/z Synthetics with pre-wash z z/z Synthetics z z/z z/z Delicate z z/z z/z Wool z z/z z/z Manual wash z z/z z/z Mix z z/z z/z z/z z/z z/z z/z z/z z/z Partial programs Rinse z Softening z Pumping water Spinning z z possibility * depending on model.
Maintenance chart Max. washing temp. 95°C Delicate wash Whitening Max. washing temp. 40°C Max. washing temp. 60°C Whitening in cold water Max. washing temp. 30°C Manual washing Washing not allowed Whitening not allowed Ironing Hot iron max. 200°C Hot iron max. 150°C Hot iron max.
PS PG2 LED 239828/en (03-10)
