Operation Manual

278988
- Selection of partial programs ( , , , )
These are independent programs and may be used when you do
not need the entire washing program. In case you would like to
use more additional programs in a sequence, you must turn off
the appliance prior any new program selection (turn the program
selector (A) to “0” for at least one second).
Rinse
A separate rinsing program with several spinnings during the
cycle and a fi nal spinning. Use this program for rinsing manually
washed clothes.
Spinning speed (rounds per minute) can be decreased by
pressing the lower spinning speed key (
).
Softening
This program is intended for softening, bleaching or impregnating
of washed laundry. It is completed with aggressive spinning at
high RPM.
Spinning speed (rounds per minute) can be decreased by
pressing the lower spinning speed key (
).
Pumping the water out
Use this program if a washing program was interrupted and you
wish to pump the water out of the machine, without spinning.
Spinning
Aggressive spinning for non-delicate laundry at high spin RMP.
You may engage the reduced spin RPM knob.
Spinning speed (rounds per minute) can be decreased by
pressing the lower spinning speed key (
).
- Adding washing and softening agents
(see Tips for washing and energy saving)
• pre-wash compartment
• main wash compartment
• softener compartment
If you do not apply the program which includes the pre-wash
feature, you may add washing detergent directly into the drum,
using the measuring vessel.
When adding softener, be careful to fi ll the dispenser
only up to the marked level.
Be sure to close the detergent dispenser when
opening/closing the appliance door.
12