Instructions for Use Washing machine
Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. Some of the materials may be recycled, others deposited or decomposed. To avoid pollution of environment, once your appliance is no longer useful, take it to your local authorized waste appliance dealer.
Description of washing machine 1. Front panel 2. Detergent dispenser 3. Door 4. Filter lid 5. Adjustable legs 6. Water outlet hose 7. Water inlet hose 8. Mains power cable Technical information (depending on model) • Max. load: 5 kg / 4,5 kg Dimensions (w x d x h): 600 mm x 440 mm x 850 mm Depth with door open: 88 cm Weight (net): 61 kg Nominal voltage: 230 V, 50 Hz Rated power: 2000 W Power socket: (230 V, 50 Hz, 10 A) Water pressure: min. 0,05 MPa, max. 0,8 MPa Fuse: 10 A 278988 • Max.
Cautions • Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! • When connecting your washing machine to water supply, be sure to use brand new water inlet hose and appropriate sealing gaskets (attached). • Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be damaged if frozen.
Installation and connection Package removal In removing the wrapping be careful not to damage the appliance with a sharp object. Before connecting the appliance, let it warm up to room temperature (wait for two hours). • Our appliances are packed in environmentally friendly materials which may be recycled, deposited or decomposed without any threat to the environment. • To this end all wrappings are marked accordingly. Removal of transport brackets • Move the pipes.
• If you have a tumble dryer of the same dimensions, you can place it on top of the washing machine. Water inlet connection To ensure correct operation of the appliance, water pressure inlet must be between 0,05 and 0,8 MPa. Minimum water pressure can be established by measuring the quantity of poured out water. 3 litres of water must be poured out from completely opened tap in 15 seconds.
Do not immerse the Aqua-stop system inlet pipe into the water, because it contains the electric valve! Water outlet connection • Fix the outlet hose to run into the sink or the bathtub, or connect it directly to the wall drain outlet (diameter min. 4 cm). • Wall drain must be installed properly and must enable occasional cleaning. • Fasten the outlet hose support with a piece of rope led through the hose elbow, to prevent the hose from slipping to the floor.
Operation A - program selector B - decreasing the spinning rpm or turning the spinning cycle off C - short program knob D - elevated water level knob E - START/PAUSE knob Program selector Signal LED’s: - washing program stages • wash + pre-wash • rinse • spin Basic programs Cotton Pre-wash Partial programs Rinse Quick program Synthetics Easy iron Softening Delicate Pumping water Wool Spinning Mix 278988 8
Washing procedure • • • • • • • Open the door of the machine. Load the laundry into the drum. Close the door. Open the water inlet faucet. Push the ON/OFF button and select the program. Add washing and treatment agents (detergent and softener). Start the operation by pushing the START knob (E). - Open the door of the machine. Door is opened by pulling the handle (lever) on the right hand side of the door towards you. - Sort the laundry by the type of fabrics.
To wash heavily soiled laundry that will not discolor, use the program with a prewash . For smaller loads (non-delicate cotton, linen, synthetic, and mixed fabric) and smaller quantities of soiled laundry (laundry refreshment, laundry wet with perspiration, etc.), we recommend quick program. To activate the program, the use of the turn the (A) button to the setting “Cotton 30°C” and then press the “Short Program (C)” key. You will save both energy and time.
Basic programs Spin speed - RPM max. reduced 1400/1300 1200/1100 1000/900/800 700 600 500 1000/800 600 Delicate 700 0 Wool 600 0 Cotton Synthetics , Mix Spin OFF (RPM max. 700 RPM). This knob switches off spin on all programs. Short program • energy-saving program • appropriate for washing lightly soiled laundry or smaller quantities of clothes • reduces washing and rinsing time • reduces water consumption (with some programs) • by pressing the key quick program on the program Cotton .
- Selection of partial programs ( , , , ) These are independent programs and may be used when you do not need the entire washing program. In case you would like to use more additional programs in a sequence, you must turn off the appliance prior any new program selection (turn the program selector (A) to “0” for at least one second). Rinse A separate rinsing program with several spinnings during the cycle and a final spinning. Use this program for rinsing manually washed clothes.
Start the operation • Push the START button (E). The machine starts operating after a few seconds. LED indicating the current washing stage lights up. If the door is not closed after the machine is switched on, the START LED starts flashing again after a few seconds. When you close the door, the machine initiates the selected program. • As each washing stage is completed the relevant washing stage indicator LED goes off and the subsequent one goes on.
• Failures Program is suspended in case a failure occurs. These are indicated by the flashing LEDs (see cf. Failures). • Power failure At electric cutout the program is interrupted, however, after the power supply has been re-established, the program operation automatically proceeds. If a power failure occurs when the drum is still full of water, be careful not to open the door before you pump the water out.
Hardness scale 1 - Soft 2 - Medium 3 - Hard Degree of hardness °dH(°N) m mol/l °fH(°F) < 8,4 < 1,5 < 15 p.p.m. < 150 8,4 - 14 1,5 - 2,5 15 - 25 150 - 250 > 14 > 2,5 > 25 > 250 In case of hard water add detergent according to the Chart for degree 1 and add appropriate quantity of water softener (see manufacturer’s instructions). • If you do not apply the program which includes the pre-wash feature, you may add washing detergent directly into the drum.
Cleaning and maintenance Disconnect the washing machine from the mains before cleaning! • The casing should be cleaned with soft cloth and mild detergent. • The interior of the drum and the door gasket is cleaned by washing at 60°C without laundry and adding half quantity of detergent. • Frequent, or predominant, washing at low temperatures, using liquid detergents, may result in development of bacteria which causes odor in the washing machine.
• Clean the entire rinsing area of the washing machine with a brush, especially the nozzles on the upper side of the rinsing chamber. • Clean frequently the water inlet hose screen under running water. • After each wash wipe the door rubber gasket. This will prolong its useful life. • Open the filter lid using flat screwdriver or similar tool. • Filter needs occasional cleaning, especially following heavily shaggy or old laundry.
• Insert the filter back as shown on the picture, and tighten by turning it in clockwise direction. To ensure good sealing the gasket surface (A) must be dirt free. Failures The washing machine automatically monitors the execution of particular functions during the operation, and reports any detected failures. In such cases signal LED’s start flashing in certain sequence. The flashing sequence changes in accordance with the nature of the detected failure.
FAILURE 2 Washing program does not start • At the beginning of the washing program: on/off LED is flashing • During washing: LEDs periodically flash twice FAILURE 3 Water does not enter the machine (after approx. 4 min the machine reports failure - LEDs periodically flash three times). Water is leaking from the machine. Possible cause Machine is not powered. Remedy Check if: • power in the socket, • the fuse is OK, • plug is in the socket. Door is not properly closed. Push it towards the machine.
Failure Greasy wads appear on the laundry. Possible cause Too little detergent (laundry was very greasy). Laundry is stained after washing. You used liquid detergent or detergent for colored laundry which does not contain whitener. White powdery residues on the laundry. It is not the consequence of bad rinsing, but because of neophosphate detergents containing non soluble components (zeolites) for water softening. Such substances may be deposited upon the laundry. Low water flow pressure.
Failure Possible cause FAILURE 5 Motor operation Motor overload or motor failure. interrupted; or motor does not operate (the machine reports a failure - the LEDs periodically flash five times) FAILURE 6 Program temperature not • Heater failure reached (the machine • Inlet water too cold reports a failure - the • Manual addition of water LEDs periodically flash six times) Remedy • Turn off the appliance and wait for a few seconds; • turn the appliance back on and repeat the washing program.
Tables Program chart - 7 kg (A-30%)n Energy cons. [kWh] RPM RPM 1000 - 1400 Water cons. [L] 1000 - 1400 Duration [min.] Spin [max. RPM] Temp. [°C] Max.
Tabella programmi - 6 kg (A-20%)n RPM 800 - 1400 800 - 1400 RPM Duration [min.] Energy cons. [kWh] Temp. [°C] Water cons. [L] Max. load [kg] Spin [max.
Program chart - 6 kg (A-10%)n 6/3** 60 6 60 6/3** 40 Cotton* Cotton 6 30 Cotton - quick 17’ 2 30 Synthetics 3 60 Synthetics 3 40 Synthetics - easy ironing 2,5 40 Delicate 1400 1000 1000 700 RPM 600 - 1400 Cotton* Cotton + prewash RPM 800 - 1400 95 Energy cons. [kWh] 600 6 Water cons. [L] Duration [min.] Temp. [°C] Cotton Spin [max. RPM] Max.
Program chart - 5,5 kg (A-10%)n 5,5/2,75** 60 5,5 60 Cotton* 5,5/2,75** 40 Cotton 5,5 30 2 30 Cotton + prewash Cotton - quick 17’ 1400 1000 RPM 166 58 51 600 - 1400 Cotton* RPM 800 - 1400 95 Energy cons. [kWh] 600 5,5 Water cons. [L] Duration [min.] Temp. [°C] Cotton Spin [max. RPM] Max.
Program chart - 5 kg (A-20%)n (slim) RPM Cotton 5 95 155 45 1,95 Cotton* 5/2,5** 60 157 42 0,68/0,62** 5 60 155 49 0,99 5/2,5** 40 147 42 0,55/0,52** Cotton + prewash Cotton* Cotton 5 30 Cotton - quick 17’ 2 30 1400 1000 Synthetics 2,5 60 Synthetics 2,5 40 Synthetics - easy ironing 2 40 Delicate 2 30 Wool 1,5 30 Mix 2,5 40 2,5 Softening 5 Pumping water 5 - Spinning 5 1400 800 - 1400 RPM 800 - 1400 Duration [min.] Energy cons. [kWh] Temp.
Program chart - 4,5 kg (A-10%)n (slim) RPM 800 - 1400 800 - 1400 RPM Duration [min.] Energy cons. [kWh] Temp. [°C] Water cons. [L] Max. load [kg] Spin [max.
Program chart / Additional functions Reduced spin RPM Short program Higher water level Program Cotton Cotton with prewash Synthetics Delicate Wool Mix Basic programs Partial programs Rinse Softening Pumping water Spinning possibility 278988 28
Maintenance chart Max. washing temp. 95°C Delicate wash Whitening Max. washing temp. 40°C Max. washing temp. 60°C Whitening in cold water Max. washing temp. 30°C Manual washing Washing not allowed Whitening not allowed Ironing Hot iron max. 200°C Hot iron max. 150°C Hot iron max.
278988 30
PS PG0A en (01-13)
