Operation Manual

141344
In case you were not successful in repairing the malfunctions in
spite of the above suggestion chart, call the nearest authorized
service shop.
Repairing the failure arising from inappropriate connections or
use of the appliance is not covered by the guarantee, and the
repair expenses are paid by the customer.
* UKS: universal stability control - this function prevents excessive vibrations during spinning.
19
Failure Possible cause Remedy
White powdery
residues on the
laundry.
It is not the consequence of bad
rinsing, but because of neo-
phosphate detergents containing
non soluble components
(zeolites) for water softening.
Such substances may be
deposited upon the laundry.
Immediately rinse the laundry once
again.
• Use liquid detergents which do not
contain zeolites.
• Try removing the residues with the
brush.
Detergent residues in
the dispenser.
Low water fl ow pressure.
Some detergents may stick to the
dispenser rather hard if it is wet.
• Clean the inlet pipe fi lter net.
• In case of low water pressure
increase water level.
• Wipe the dispenser prior loading
detergent.
Softener is not
completely rinsed,
or water is left in the
dispenser dish.
Sucking cover is not correctly
positioned or is clogged.
Clean the dispenser and fi rmly fi x the
cover to its place.
Unpleasant smell in
the washing machine
drum.
Remains of fabrics, washing
agent and softener in the fi lter.
Check whether the fi lter is clean.
Washing time is longer
than usual.
Time indicated on the
display is corrected
during the washing
cycle.
• Low temperature of inlet water.
• Due to unevenly distributed
load, the machine has activated
the UKS*.
• Low mains voltage.
• There has been a failure in the
power supply.
• Washing program time may be up to
60% longer; however, this does not
imply a fault in the machine.
• Washing time is extended by the
power supply down-time.