Instructions for Use Washing machine
Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. Some of the materials may be recycled, others deposited or decomposed. To avoid pollution of environment, once your appliance is no longer useful, take it to your local authorized waste appliance dealer.
Description of washing machine Technical information (depending on model) 5. Adjustable legs 6. Water outlet hose 7. Water inlet hose 8. Mains power cable Dimensions (w x d x h): 600 mm x 600 mm x 850 mm Dimensions (w x d x h): 600 mm x 440 mm x 850 mm Depth with door open: 106 cm / 88 cm (depending on model) Weight (net): 90 kg / 79 kg (depending on model) Nominal voltage: 230 V, 50 Hz Power: 2300 W / 2200 W (depending on model) Max.
Cautions • Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! • When connecting your washing machine to water supply, be sure to use brand new water inlet hose and appropriate sealing gaskets (attached). • Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be damaged if frozen.
Installation and connection Package removal In removing the wrapping be careful not to damage the appliance with a sharp object. Before connecting the appliance, let it warm up to room temperature (wait for two hours). • Our appliances are packed in environmentally friendly materials which may be recycled, deposited or decomposed without any threat to the environment. • To this end all wrappings are marked accordingly. Removal of transport brackets • Move the pipes.
• If you have a tumble dryer of the same dimensions, you can place it on top of the washing machine. Water inlet connection To ensure correct operation of the appliance, water pressure inlet must be between 0,05 and 0,8 MPa. Minimum water pressure can be established by measuring the quantity of poured out water. 3 litres of water must be poured out from completely opened tap in 15 seconds.
Damaged mains power cable may be replaced only by the producer or his authorized personnel. 141344 Never plug the appliance into the electric shaver socket or hair dryer socket.
Operation A - program selector B - pump stop knob C - START/PAUSE knob Program selector Signal LED’s: - ON/OFF (orange) - pump stop/failure (green) Basic programs Partial programs Cotton Rinse Pre-wash 141344 8 Short program Synthetics Softening Short program Delicate Pumping water Wool Spinning
Washing procedure • • • • • • • Open the door of the machine Load the laundry into the drum Close the door Open the water inlet faucet Push the ON/OFF button and select the program Add washing and treatment agents (detergent and softener) Start the operation by pushing the START knob (C) - Open the door of the machine. Door is opened by pulling the handle (lever) on the right hand side of the door towards you. - Sort the laundry by the type of fabrics.
cloth, bathroom towels, top garments, etc. For less stained laundry of this type, use short program. It saves energy and washing time. For heavily stained permanent press use the program with the pre-wash . Synthetics Normally stained shirts, blouses and other polyester and polyamide garments, or a mixture of these fabrics with cotton. For less stained laundry of this type, use short program. It saves energy and washing time.
selector (A) to “0” for at least one second). Rinse Independent program for rinsing delicate laundry, without intermediate spinning and with short final spin. You may use it for rinsing manually washed delicate laundry or for extra rinsing for people with skin sensitive to detergents. Softening This program is intended for softening, bleaching or impregnating of washed laundry. It is completed with spinning at max. 1000 RPM.
selected additional functions (i.e. PUMP STOP) have to be reactivated. , so they - End of operation Flashing START/STOP LED indicates that the program was completed. • Extract the laundry from the drum and remove any alien objects from the door gasket. • Leave the door ajar to allow the interior to dry. • Close the water inlet faucet. • Switch the machine off by turning the program selector to position “0”. • Pull the power lead from the socket and cut the power supply from the mains.
Tips for washing and energy saving • Before washing sort out the laundry according to the type, degree of dirtiness and color fastness. • Prior selecting the washing program consult the sewn tab with information on a particular piece of laundry (see Maintenance chart on the last page). • Wash separately the new colored textile products for the first time. • Wash heavily soiled laundry in small quantities and add more detergent. • Treat stubborn stains with special stain remover, it will save energy.
• High spin RPM leave less moisture in laundry which dries out much quicker in the tumble dryer, thereby saving energy. Do not put clods of detergent into the soap dispenser as the tube in the washing machine may clog. Cleaning and maintenance Disconnect the washing machine from the mains before cleaning! • The casing should be cleaned with soft cloth and mild detergent. • The interior of the drum and the door gasket is cleaned by washing at 60°C without laundry and adding half quantity of detergent.
• Wash it under running water using a brush, and dry it. Remove any leftover dried detergent from the bottom of the casing. • Clean the entire rinsing area of the washing machine with a brush, especially the nozzles on the upper side of the rinsing chamber. • Clean frequently the water inlet hose screen under running water. • After each wash wipe the door rubber gasket. This will prolong its useful life. • Open the filter lid using flat screwdriver or similar tool.
• Before cleaning, drain any water from the machine via drain pipe (certain models only). • Turn it anti-clockwise, pull it out and clean under running water. • Insert the filter back as shown on the picture (arrow and pointer), and tighten by turning it in clockwise direction. To ensure good sealing the gasket surface (A) must be dirt free.
Failures The washing machine automatically monitors the execution of particular functions during the operation, and reports any detected failures. In such cases both signal LED’s start flashing in certain sequence. Flashing sequence changes in accordance with the nature of the detected failure. In some cases you may attempt removing certain failures yourself, so count the number of flashes, repeating after certain pauses.
Failure The machine does not work (symbols are not illuminated). Possible cause Machine is not powered. Washing program does not start (ON/OFF LED is flashing). Water does not enter the machine (after approx. 8 min the machine reports failure -3 flashes). Water is leaking from the machine. Door is not properly closed. The machine moves during operation. The machine vibrates during the spin. Excessive foaming during washing.
Failure White powdery residues on the laundry. Detergent residues in the dispenser. Softener is not completely rinsed, or water is left in the dispenser dish. Unpleasant smell in the washing machine drum. Washing time is longer than usual. Time indicated on the display is corrected during the washing cycle. Possible cause It is not the consequence of bad rinsing, but because of neophosphate detergents containing non soluble components (zeolites) for water softening.
Tables Program chart - 7 kg 1000 - 1300 400 - 1300 Additional function Pump stop Cotton - white 7 95 156 72 67 62 2,31/2,19** z Cotton - color * 7 60 147 66 61 56 1,33/1,19** z Cotton + prewash 7 60 172 76 71 66 1,45/1,32** z Cotton 7 40 121 66 61 56 0,67 z Cotton - short 7 40 77 66 61 56 0,58 z Synthetics 3,5 60 Synthetics 3,5 40 Synthetics-short 3,5 40 Delicate 3 40 Delicate 3 30 Wool 2 30 Spin (RPM) 800 - 900 RPM 400 - 700 RPM Durati
139 68 63 58 800 - 1300 95 400 - 700 1000 - 1300 6 Spin (RPM) 800 - 900 RPM 400 - 700 RPM Duration (min.) Energy cons. kWh Temp. (°C) Cotton - white Water cons. L Max.
Program chart - 4,5 kg Additional function Pump stop 47 1,80 z 44 0,85 z 172 49 0,99 z max. 1400 Water cons. L 140 145 Duration (min.) 95 60 Spin (RPM) 4,5 4,5 Temp. (°C) Cotton - white Cotton - color * Max. load (kg) Energy cons. kWh Basic program Cotton + prewash 4,5 60 Cotton 4,5 40 116 44 0,51 z Cotton - short 4,5 40 70 44 0,46 z 2 60 112 31 0,61 z Synthetics Synthetics 2 40 Synthetics-short 2 40 Delicate 1,5 40 Delicate 1,5 30 1 30 max.
Maintenance chart Normal wash Max. washing temp. 95°C Delicate wash Whitening Max. washing temp. 40°C Max. washing temp. 60°C Whitening in cold water Max. washing temp. 30°C Manual washing Washing not allowed Whitening not allowed Ironing Hot iron max. 200°C Hot iron max. 150°C Hot iron max.
PS PG1 141344/en/ (03-08)
