Instructions for Use Washing machine
Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. Some of the materials may be recycled, others deposited or decomposed. To avoid pollution of environment, once your appliance is no longer useful, take it to your local authorized waste appliance dealer.
Description of washing machine (depending on model) 1. 2. 3. 4. 5. Front panel Detergent dispenser Door Filter lid Adjustable legs 6. Water outlet hose 7. Cold water inlet hose 8. Hot water inlet hose (only with some models) 9. Power cord Technical information (depending on model) • Max.
Cautions • Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! • When connecting your washing machine to water supply, be sure to use brand new water inlet hose and appropriate sealing gaskets (attached). • Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be damaged if frozen.
Installation and connection Package removal In removing the wrapping be careful not to damage the appliance with a sharp object. Before connecting the appliance, let it warm up to room temperature (wait for two hours). • Our appliances are packed in environmentally friendly materials which may be recycled, deposited or decomposed without any threat to the environment. • To this end all wrappings are marked accordingly. Removal of transport brackets • Move the pipes.
• If you have a tumble dryer of the same dimensions, you can place it on top of the washing machine. Water inlet connection (depending on model) To ensure correct operation of the appliance, water pressure inlet must be between 0,05 and 0,8 MPa. Minimum water pressure can be established by measuring the quantity of poured out water. 3 litres of water must be poured out from completely opened tap in 15 seconds.
• If your washing machine features both cold and hot water attachments, but you only wish to connect it to the cold water supply, please remove the hot water inlet hose from the back of the appliance. Then, use the supplied cover to close the hot water inlet. The inlet hose should be tightened manually, firmly enough to prevent any leaks. After tightening the hose, check for any leaks.
231711 8
Operation A - program selector B - pump stop knob C - START/PAUSE knob Program selector Signal LED’s: - ON/OFF (orange) - pump stop/failure (green) Basic programs Partial programs Cotton Pre-wash Quick program Quick program Synthetics Quick program • • • • • • • Softening Delicate Pumping water Wool Spinning Open the door of the machine Load the laundry into the drum Close the door Open the water inlet faucet Push the ON/OFF button and select the program Add washing and treatment agents (deterg
- Open the door of the machine. Door is opened by pulling the handle (lever) on the right hand side of the door towards you. - Sort the laundry by the type of fabrics. Do the buttons and zippers, tie the strings and pull out the pockets. Very delicate laundry should be put in a special protective sack. It is suggested to load the drum with items of different sizes.
the use of the energy and time. quick program. This way, you will save both Synthetics Normally stained shirts, blouses and other polyester and polyamide garments, or a mixture of these fabrics with cotton. For less stained laundry of this type, use short program. It saves energy and washing time. Delicate This is a program for delicate fabrics (dresses, skirts, blouses) and curtains.
Rinse Independent program for rinsing delicate laundry, without intermediate spinning and with short final spin. You may use it for rinsing manually washed delicate laundry or for extra rinsing for people with skin sensitive to detergents. Softening This program is intended for softening, bleaching or impregnating of washed laundry. It is completed with spinning at max. 1000 RPM.
- End of operation Flashing START/STOP LED indicates that the program was completed. • Extract the laundry from the drum and remove any alien objects from the door gasket. • Leave the door ajar to allow the interior to dry. • Close the water inlet faucet. • Switch the machine off by turning the program selector to position “0”. • Pull the power lead from the socket and cut the power supply from the mains.
Tips for washing and energy saving • Before washing sort out the laundry according to the type, degree of dirtiness and color fastness. • Prior selecting the washing program consult the sewn tab with information on a particular piece of laundry (see Maintenance chart on the last page). • Wash separately the new colored textile products for the first time. • Wash heavily soiled laundry in small quantities and add more detergent. • Treat stubborn stains with special stain remover, it will save energy.
• High spin RPM leave less moisture in laundry which dries out much quicker in the tumble dryer, thereby saving energy. Do not put clods of detergent into the soap dispenser as the tube in the washing machine may clog. Cleaning and maintenance Disconnect the washing machine from the mains before cleaning! • The casing should be cleaned with soft cloth and mild detergent. • The interior of the drum and the door gasket is cleaned by washing at 60°C without laundry and adding half quantity of detergent.
• Wash it under running water using a brush, and dry it. Remove any leftover dried detergent from the bottom of the casing. • Clean the entire rinsing area of the washing machine with a brush, especially the nozzles on the upper side of the rinsing chamber. • Clean frequently the water inlet hose screen under running water. • After each wash wipe the door rubber gasket. This will prolong its useful life. • Open the filter lid using flat screwdriver or similar tool.
• Before cleaning, drain any water from the machine via drain pipe (certain models only). • Turn it anti-clockwise, pull it out and clean under running water. • Insert the filter back as shown on the picture, and tighten by turning it in clockwise direction. To ensure good sealing the gasket surface (A) must be dirt free. Failures The washing machine automatically monitors the execution of particular functions during the operation, and reports any detected failures.
6 - Six flashes: Heater failure In these cases, turn off the machine, then turn it back on and repeat the program. If the failure reoccurs, contact your nearest authorized service center. The LEDs will continue to flash until the machine is turned off. Interferences from the ambient (for example electrical wiring) could induce signalization of different faults. In such cases: - switch the appliance off, and wait for a few seconds; - switch the appliance back on and repeat the washing program.
Failure Possible cause Excessive foaming during Excessive measure of washing. detergent. FAILURE 7 Water is poorly pumped out or not at all (machine reports failure - the LEDs periodically flash seven times). Check if: • the filter is clean, • outlet pipe is not jammed, • the drain is clogged, • outlet pipe is positioned higher than 1m. Push START again The machine operates normally. Wash large and small pieces of laundry together. The machine switched on the UKS function.
Failure Washing time is longer than usual. FAILURE 1 Program temperature not reached (the machine reports a failure - the LEDs periodically flash once) Possible cause Remedy • Low temperature of inlet water. • Washing program time may be up • Due to unevenly distributed to 60% longer; however, this does load, the machine has not imply a fault in the machine. activated the UKS*. • Low mains voltage. • There has been a failure in the • Washing time is extended by the power supply. power supply down-time.
Tables Program chart - 7 kg 1000 - 1300 400 - 1300 Additional function Pump stop Cotton - white 7 95 156 72 67 62 2,31/2,19** z Cotton - color * 7 60 147 66 61 56 1,33/1,19** z Cotton + prewash 7 60 172 76 71 66 1,45/1,32** z Cotton 7 40 121 66 61 56 0,67 z Cotton - quick 7 40 77 66 61 56 0,58 z Cotton - quick 17’ 2 30 Synthetics 3,5 60 Synthetics 3,5 40 Synthetics - quick Spin (max. RPM) 800 - 900 RPM 400 - 700 RPM Duration (min.
95 139 68 63 58 800 - 1300 1000 - 1300 6 400 - 700 800 - 900 RPM 400 - 700 RPM Duration (min.) Energy cons. kWh Temp. (°C) Water cons. L Max. load (kg) Cotton - white Spin (max.
Program chart - 4,5 kg (slim) Energy cons. kWh Additional function Pump stop 95 140 47 1,80 z 4,5 60 145 44 0,85 z Cotton + prewash 4,5 60 172 49 0,99 z 1400 Water cons. L 4,5 Cotton - color * Duration (min.) Temp. (°C) Cotton - white Spin (max. RPM) Max.
Maintenance chart Normal wash Max. washing temp. 95°C Delicate wash Whitening Max. washing temp. 40°C Max. washing temp. 60°C Max. washing temp. 30°C Whitening in cold water Manual washing Washing not allowed Whitening not allowed Ironing Hot iron max. 200°C Hot iron max. 150°C Hot iron max.
