Use Instructions

50 mm
115/16"
• Place the appliance at least
1 15/16" (50 mm) away from an electric or
gas stove, and at least 11 13/16" (300 mm)
away from a heat source (e.g. a radiator
or a heater). If such clearance is not
possible, then install an insulation panel.
• Do not expose the appliance to direct
sunlight.
• We recommend free-standing installation
of the appliance. When necessary, it can
also be placed adjacent to cabinetry, if
adequate ventilation and cooling of the
installation location (e.g. air-conditioning)
are provided. In such a case, the
appliance power consumption is likely to
increase.
• There has to be a clearance of at least
1 15/16" (50 mm) between the appliance
and any cabinet above it.
700 mm
115
1435 mm
1018 mm
318 mm
min
115/16"
50 mm
min
100 mm
315/16"
279/16"
100 mm
min
315/16"
121/2"
3/16"
5 mm
561/2"
279/16"
683 mm
267/8"
1485 mm
587/16"
min
• To allow for adequate ventilation and
cooling of the appliance, there has to be
sufficient clearence behind the appliance
and on both sides as well (at least
1 15/16" (50 mm)). Please, also observe
the clearance required to fully open the
door in order to allow pulling out the
drawers and shelves (see installation
diagram).
• In cases of installation where there is less
than 1 15/16" (50 mm) of space around
the cabinet, a recess must be made at the
ventilation grilles on both sides of the
appliance (ventilation grilles must not be
blocked) which must be able to supply or
exhaust air on each side through an
opening of at least 31"
2
(200 cm
2)
.
• Furthermore, 1 15/16" (50 mm) distance
from the rear wall must always be
maintained and must be connected to an
opening above or behind the cabinet.
13
Installation and connection