Operation Manual

260437

• If your appliance is ﬁ tted with a digital display, it will ﬂ ash while

changes are made to the temperature setting and the currently

set temperature will be indicated. When the ﬂ ashing stops, the

setting is saved and automatically stored. When the appliance

is switched on for the ﬁ rst time, temperature +9°C is displayed

and display ﬂ ashes. This value is displayed until temperature

in the refrigerator drops below this value. Then, the ﬂ ashing

will stop and the actual temperature in the refrigerator will be

displayed.

• Use this setting after switching on the appliance for the ﬁ rst

time, before cleaning, or when inserting a large amount of food

into the freezer. If the function is not deactivated manually, it

will be deactivated automatically after approximately two days.

Freezer boost