Operation Manual

133624

Prior any cleaning attempt disconnect the appliance from

the mains (pull the power cord from the mains wall outlet).

Make sure to remove traces of any cleansing agents you had

been using.

• Clean the exterior of the appliance with water and liquid

detergent.

• For cleaning of plastic, coated, or aluminum parts avoid using

abrasive or special cleansing agents (like the stainless steel

polish), otherwise you may damage the surface.

• Clean coated and aluminum surfaces using the soft cloth and

alcohol based cleaning agent (like glass cleaner).

• Wash the interior of the appliance with liquid detergent and

lukewarm water, mixed with a little vinegar.

• The condenser on the rear wall must always be clean and

free of dust or kitchen fumes deposits, therefore clean the dust

periodically with non-metallic brush or vacuum cleaner.

• Clean also the drip pan above the compressor. Ice and/

or frost deposits exceeding 3-5 mm increase energy

consumption, so you need to remove them regularly (not for

the NO FROST freezer). Do not use sharp pointed objects,

solvents or sprays.

• After cleaning switch the appliance on and reload the food.

• Clean the interior of the appliance and wipe it dry (see chapter

Cleaning).

• Before reloading food into the freezer switch the appliance on.

Defrosting of NO FROST freezer is automatic. Periodic

appearance of frost layer eventually disappears automatically.

Defrosting the NO

FROST freezer

Cleaning