Installation Instructions

Instruction for Changing Direction of opening the door 7
For one - door appliances with worktop,
500 mm width
If you find the direction of opening the door on your
appliance inconvenient, you can change it. Holes
on the opposite side have already been prepared
in the factory and are now plugged.
• Unscrew the lower hinge with foot and
remove the door ot the appliance.
• Unscrew the other foot and fix it on the place
where previously was the hinge with the foot.
• Rotate the fastener having the function of
the upper hinge counter clockwise, take it off
and replace it on the opposite side of the
door.
• Put the door on the fastener having the function of
the upper hinge.
• Put the fastener with foot of the lower hinge
(with a washer) into the plastic corner with a
hole and fix the lower hinge.
• Unscrew the handle and replace it on the
opposite side (not for handles mouinted
horizontally).
Some screws are covered with caps. Take
them off before undoing the screws.
• Plug the remaining holes with decorative
caps.
• Check the gasket, it shouldn't be creased
and it should seal well. In case it does not fit
perfectly, pull it out and rotate for 180°. In
certain models it is not possible to replace
the door gasket. Should the seal not adhere
to the casing of the appliance perfectly, it will
have to be heated from a suitable distance
(by means of hair drier, for example) and
lightly stretched to the required height. In
certain models it is not possible to replace
the door gasket.
Changing the Direction of Opening the Door
on the Low Temperature Compartment
• Unscrew the blocking element and the hinge
of the low temperature compartment and
take off the door.
• Plug the holes with plastic caps provided.
• Turn the door for 180° and replace it on the
opposite side of the low temperature
compartment. Fix the hinge and the blocking
element of the door (position of holes
already provided).
1 Lower hinge with foot
2 Lower hinge washer
3 Foot
4 Fastener
5 Handle
6 Low temperature compartment
7 Blocking element
8 Door hinge