Operation Manual

142420

First plug the power cord into the wall outlet. The LCD display is

on and indicates dashes.

• Switch the appliance on by pressing button

(A) for 3

seconds.

• Display indicates temperature +9°C, and it remains on the

display until the actual temperature within the unit falls below

this value.

• The appliance temperature is factory preset to the

recommendable +5°C.

Temperature setting range is from +1°C to +9°C (or +3°C to

+8°C for appliances equipped with the ZeroZone drawer).

The ZeroZone drawer temperature: between -2°C and +3°C

(not adjustable).

Reducing the temperature:

press button .

Increasing the temperature: press button .

• When you press one of temperature setting buttons, the

digital display starts ﬂ ashing and indicates the last selected

temperature.

• Temperature setting is changed by short intermittent pressing

of the button in 1°C steps. During the setting procedure all

other buttons are void.

• Around 5 seconds after the release of the button, the display

automatically indicates the actual temperature.

Turn it on/off by pressing the button

(B) for 3 seconds. Before

ﬁ rst setting, or in case of power failure, display ﬂ ashes 0:00. By

simultaneous pressing of button (G) and

or set hours,

and button (H) with

or set minutes.

In case of power failure display ﬂ ashes and indicates maximum

reached temperature during the failure (max. +25°C). The

appliance operates on preceding settings. To display actual

temperature press the Alarm button.

The ON/OFF button

Setting the temperature

Setting the clock

Power failure