Operation Manual

142420
When switching on the appliance for the fi rst time, fi rst connect
the power cord plug to a mains socket.
Digital display unit will light up, »dashes« appear.
• To switch the appliance on/off, press the
(A) key and hold it
for 3 seconds.
• Temperature +9°C will be indicated on the display. This value
will remain displayed until actual temperature in the refrigerator
drops below this value.
• The appliance is preset to the recommended refrigerator
temperature of +5°C.
Refrigerator temperature range: +1°C to +9°C (+3°C to +8°C
for appliances with ZeroZone drawer)
Temperature in the ZeroZone drawer: from -2°C to +3°C (not
adjustable)
Setting a lower temperature: Press the (G) key.
• When the (G) key is pressed, the display will start fl ashing and
the most recent setting will be displayed.
• Set the temperature by briefl y pressing the (G) key. Each time
the key is pressed, temperature is decreased by 1°C. During
the temperature stetting procedure, all other keys are disabled.
• Approximately 5 seconds after releasing the most recently
pressed key, actual temperature is automatically displayed.
Alarm
Continuous acoustic signal - open refrigerator door alarm
If the refrigerator door is open for more than one minute, a
continuous acoustic signal (beep) is activated and the signal light
(D) will light up. The acoustic alarm will be switched off when the
door is closed or when the alarm is acknowledged with the
(C) key.
Intermittent acoustic alarm - high refrigerator temperature
alarm
When the temperature is too high, an intermittent acoustic signal
will be activated, signal light (D) will light up, and the temperature
display will fl ash.
• Acknowledge and turn off the acoustic alarm by pressing the
(C) key. As soon as the temperature in the refrigerator
drops to a level that no longer represents food spoilage
hazard, the signal light (D) will be switched off and the display
will stop fl ashing.
After the appliance is switched on for the fi rst time, there is a 24-
hour delay in alarm operation to prevent unnecessary activation.
Switching the appliance
on/off
Changing the
temperature
Other settings
13