Operation Manual
Instructions for Use
11
Description of the Appliance
1
Shelf (1)
(the number of shelves depends on model)
Shelf can be optionally placed on the guides inside the
appliance. It is protected against pulling out. If you want to
remove it, slightly lift up the back part and pull it out.
Quickly perishable food should be stored on the back i.e. the
coldest part of the shelves.
Bottle rack
(only some models have it)
Bottle rack (number depends on model) is intended for storing
the bottles. There are two installation positions available
(horisontal or lifted in the font) thus enabling the positioning of
bottles on the stopper as well.
It is protected against the extraction. If you want to extract it,
lift its rear part and pull towards yourself.
Warning!
When storing longer bottles, install the rack on higher position
not disturbing the closing of the door inner liner (vessels,
bottles or food stored in the door), however its positioning on
guides in the appliance is optional.
Defrost Water Outlet (2)
The interior of the refrigerator is cooled with cooling plate
incorporated in the rear wall. Under the plate there is a channel
and an outlet for defrost water.
Regularly check the defrost water outlet and the channel,
because they should never be clogged (as for example with
food rests). If clogged, use a plastic straw and clean it.
Fruit and Vegetable Container (3)
The container is on the bottom of the appliance under the glass
shelf. It provides adequate humidity which has favourable
effect on fruit and vegetables stored in it (less dehydration).
Bottle stopper (4)
(in some models only)
The bottle stopper (number depends on the model) prevents
the bottles from moving in the door rack.
The fan
(certain models only)
• The fan distributes evenly the inside temperature and
reduces dew on storage shelf surfaces.
• When the refrigerator door is opened, the fan stops
operating.
• It is recommended to switch the fan on:
− when the ambient temperature in the room is increased
(above 30°C),
− in case of increased humidity (during summer season).
• Switching the fan on/off
ON =
OFF =
0
Note: Energy consumption is increased during fan operation.