Operation Manual

Instructions for Use30
Changing the Direction of Opening the Door
If you find the direction of opening the door on your appliance
inconvenient, you can change it. Holes on the opposite side have
already been prepared in the factory.
• Unscrew the kick-plate and remove it by pushing downwards.
• Unscrew the lower hinge and take off the door together with the
upper hinge washer.
• Unscrew the upper hinge fastener and fix it on the opposite side of
the appliance.
• Take off, change and replace the door hinge fixture and the fixture
plugs.
• Put the door with the upper hinge washer on the upper hinge
fastener.
• Fix the lower hinge with washer on the new position.
• Replace the cover plate of the lower hinge to the opposite side of the
kick-plate and fix it to the appliance.
• In case your appliance is equipped with a handle mounted on the
side of the appliance, take it off and replace it on the other side.
Some screws are covered with caps. Take them off before undoing
the screws.
• Check the gasket, it shouldn't be creased and it should seal well.