Operation Manual

Fault: Cause/Remedy

Bulb replacement:

• Before replacing the light bulb, disconnect the appliance

form the power supply. Using the screwdriver remove the

cover, replace the bulb with a new one (E14, same voltage

as the factory one) and ﬁ t back the cover.

• Don’t forget: the old bulb does not belong to organic waste.

• Light bulb is consumption material and is not covered by the

warranty.

• Bulb lamps used in this appliance are special purpose lamps

selected for household appliances use only. They are not

suitable for household room illumination.

Error code displayed: • If the character E1 appears on the digital display call service

assistance.

Troubleshooting helpful hints: • If you are not able to ﬁ x the trouble by any of the above tips,

disconnect the power cord from the mains outlet, wait 10

minutes, and reconnect the appliance.

In case trouble persists, contact the nearest authorized

service center, giving them the type, model and serial

number of the appliance, written on the rating plate in the

inside of the appliance.

133624