Instruction manual

Instructions for Use
7
Operation of hotplates
x Hotplates are controlled by knobs, located at
the control panel.
x Symbols adjacent to the knobs indicate their
location.
x Heating power is regulated in steps. (0-3).
x It is recommended to switch the hotplate off 3-5
minutes before the completion of cooking, and
use the remaining accumulated heat.
x Following are the recommended power
regulations.
Step Suitable for
S
0
hotplate off, use of remaining heat
x
maintaining temperature, slow cooking,
small quantities of food (min. power)
1
slow cooking
x
slow cooking of large quantities, slow
fryanig of large big chunks
2
frying, preparing soup basis
x
frying
3 boiling, browning, frying (maximum
power)
Extra Fast Hot Plate
Express hotplate is more powerful than the
regular one, which means that it heats up much
quicker.
It is marked by the red dot in the middle,which
may disappear with time due to repeated
cleaning.
Control Lamp
Control lamp is built in adjacent to the hotplate
selector, and is lit when the relevant hotplate is
active.
Refrigerator
Refrigerator (A)
Refrigerator is used for storing fresh foods for few
days.
Freezer (B)
Freezer is used for freezing fresh foods and for
storing already frozen foods.
Opening the freezer door
Shelf (1)
(number depends on the model)
Shelf can be optionally placed on the guides
inside the appliance. It is protected against pulling
out. If you want to remove it, slightly lift up the
back part and pull it out.
Glass shelves (some models only have them) are
protected with plastic spacers. Before pulling the
shelf out, spacers must be moved towards you.
Spacers can be also removed, however, it is
better to keep them for any later transport.