Pantry kitchen EN Thank you for your trust and for buying this appliance. We hope it will successfull y serve the purpose for many years. The pantry kitchen was designed for home use and it consists of a cooker (two hot plates), a refrigerater and a sink. Before Use ....................................................... 2 Cooker Refrigerator We Care for the Environment Tips for Energy Savings .................................
polystyrol (PS), as well as paper, cardboard and other similar materials. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Tips for effective use of crockery x The best transfer of energy is obtained if the bottom diameter of the dish is identical to the hotplate diameter, and if the dish is placed exactly in the center of the hotplate. x If the diameter differs, it is always better to have bigger crockery than smaller. The loss of energy is greater, and stains may be burned to the hotplate. x Use pot lids and cover your cookware whenever possible. x The dish size should always suit the quantity of food.
x For the sake of environment protection - be careful not to damage the rear wall of the appliance (the condenser unit or the tubes - for example when moving the appliance) or any part of the refrigerating system inside the appliance. Do not use sharp object for defrosting the appliance. Use only enclosed tools or tools recommended by the manufacturer.
Description of the Appliance The cooker of the kitchen unit is located above the refrigerator. Under the sink, there is an empty space which can be used for storing various household accessories or for mounting the waste bin. The pantry kitchen with control knobs located by the hot plates is manufactured in two versions - right-handed and left-handed. Both versions may incorporate one of the following type of refrigerator: HTS 1351, HTS 1356.
Operation of hotplates x Hotplates are controlled by knobs, located at the control panel. x Symbols adjacent to the knobs indicate their location. x Heating power is regulated in steps. (0-3). x It is recommended to switch the hotplate off 3-5 minutes before the completion of cooking, and use the remaining accumulated heat. x Following are the recommended power regulations.
Quickly perishable food should be stored on the back i.e. the coldest part of the shelves. Defrost Water Outlet (2) Regularly check the defrost water outlet and the channel, because they should never be clogged (as for example with food rests). If clogged, use a plastic straw and clean it. Fruit and Vegetable Container (3) x Changes of the ambient temperature affect temperature in the interior of the appliance (choose correct setting of the thermostat knob).
cause damages when in contact with plastic surfaces or gaskets for longer period of time. x Unpleasant odor inside the refrigerator is a sign that something is wrong with foods or that your refrigerator needs cleaning. Unpleasant odor can be eliminated or reduced by washing the interior of the refrigerator with a mild solution of water and vinegar. We also recommend using activated carbon filters to clean the air or to neutralize odors.
the temperature is not higher than -18°C. Do not buy packages of food covered with frost layer. This indicates that the package was thawed before at least once. Be careful that packages don't start to thaw, as the temperature raise reduces the quality of foods.
and any other kind of moisture may damage the hotplates, so always wipe them dry after cleaning. To maintain the appearance of hotplates you may use a few drops of sewing machine oil and rub it in, or use the usual cleaning and maintaining agents, available in stores. Never apply butter, lard and the like, as you might provoke corrosion. Cleaning agent will penetrate quicker if the hotplate is warm.
Trouble-Shooting Guide The user can come across troubles appearing during the operation of the appliance. We are listing some of troubles, which in most cases result from improper handling of the appliance and can be eliminated by yourself. The Appliance Fails to Operate After Connecting to the Mains Supply Check the supply in the outlet socket and make sure the appliance is switched on (thermostat knob in operating position).
After you have considered all the above stated instructions and the malfunction still cannot be eliminated, call the nearest authorised service. Any claim or malfunction caused by improper installation or misuse is not covered by the guarantee. All repair costs shall be covered by the user. WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO INFLUENCE ON THE OPERATION OF THE APPLIANCE.
