Operating Instructions and Installation Instructions
492203
Note: The front left and the rear right cooking zones feature
the power boost function. In a cooking zone with this
function, extra power is activated for fi ve minutes; then, the
zone switches to level 9.
Activating the Power Boost
• Press the relevant sensor (C) to select the cooking zone.
Use the »–« or »+« sensor (E) to choose the power level 9;
then, press »+« immediately.
»P« will appear on the power level display.
Deactivating the Power Boost
• Press the sensor for the selected cooking zone (C); then,
immediately press the »–« sensor (E). The »P« symbol
will disappear and the cooking zone will switch to power
level 9.
Safety switch o
Power setting
Hours lapse prior safety switch
o
1 8
2 6
3 5
4 5
5 4
6 1,5
7 1,5
8 1,5
9 1,5
P 1,5
Maximum continuous operation of a particular hotplate
is limited, and the duration is displayed in the above
chart. When the hotplate is switched o by the safety
mechanism, the indicator displays symbols »0«, or »H« in
case there is any remaining heat left.
Example:
Set the cooking zone to level 6 and leave it to operate for
a while. If the cooking zone setting is not changed, the
security mechanism will switch o the zone after one and
a half hour.
• The hob is fi tted with a cooling fan which cools the
electronic components during cooking. The fan may
operate for a while even after the end of the cooking
process.
Operation time limit
Overheating safety
device
12