Operation Manual

285764
Boost
The ‘Boost’ function is used to cook at maximum power for
a short period of time (maximum 10 minutes). The power is
reduced to setting 9 at the end of the maximum boost time.
Switching on the boost function
The hob is switched on and a pan is on the cooking zone.
1. Touch the
button. (You can also use this button if a power
has been set).
2. Touch the
or the button for the desired cooking zone.
The display shows ‘P.’. The boost function is immediately
active.
If the
or the buttons are not touched, the red light to the
right above the
button will fl ash for 3 seconds and then stop.
You will hear a single bleep.
Switching off the boost function
The boost function is switched on, the display shows ‘P.’.
1. Touch the
button.
The display shows power setting 9, the boost function is
switched off. Or:
2. Touch the
or the button at the same time.
The display shows setting ‘0.’, and the cooking zone is
switched off.
• Two cooking zones behind each other
- Two cooking zones that are behind each other infl uence
each other. The power is automatically distributed when
these cooking zones are used at the same time. This does
not have any consequences up to setting 9. Selecting
the Boost setting for one of the cooking zones, however,
automatically switches the other cooking zone to a lower
setting.
- If one of the cooking zones is set to boost and you want to
set the other zone to setting 9 or Boost, the cooking zone
that is set to boost will automatically be switched to a lower
setting.
- Two cooking zones that are beside each other do not
infl uence each other. You can set both cooking zones to
Boost.
15